RICHMOND 50mm Hanging Door Roller Channel Kit with Track Joining Bracket
In StockRelated products
-
Sliding Gate HardwareRICHMOND Bend To Suit Double Gate Guide Roller Bracket
Bolt: 14
L (mm): 15-65
A (mm): 40
B (mm): 60
Overall Length(mm): 350
Capacity(kg): 50
These sliding gate roller guide brackets are designed to be drilled and bent to suit the installation. The wide adjustment suits gates from 15mm to 65mm wide. Rollers can be mounted in either side of the slot depending on your needs. These brackets are fitted with 2 low wear, low friction, solid nylon rollers. Ideal for both automatic sliding gates and manual sliding gates.
(0 reviews) -
Sliding Gate HardwareRICHMOND White Gate Sliding Block
This white nylon sliding gate block allows a sliding gate to be mounted on uneven ground, or on an angle, by sliding up and down a channel while sliding the gate. The dimensions of the block are 74(W) x 62(L) x 76mm(H).
When combined with an aluminium slide block guide channel this sliding block is ideal for mounting a guide for sliding gates that have pickets, wire, or timber slats attached to the front of the gate. They also guide the gate on sloping/uneven ground.
(0 reviews) -
Sliding Gate HardwareRICHMOND 80mm Gate Stopper
A (mm): 50
B (mm): 100
C (mm): 80
H (mm): 95 (80mm to center of rubber stopper)
Gate stopper with bolt down base to prevent your swing gate or sliding gate from opening too far. Richmond gate stoppers feature a silver zinc plated steel frame and a durable rubber stopper. Richmond stock a wide range of gate hardware and gate kits suitable for both swing gates and sliding gates.(0 reviews) -
Sliding Gate HardwareRICHMOND Gate Support Bracket
A (mm): 125
L (mm): 120
H (mm): 130
C (mm): 35
S (mm): 5
D (mm): 11
Weight (g): 1098
Fastners: 4
(0 reviews)