[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

OX Pro Soft Cut Diamond Blade – 6″

In Stock
SKU: N/A Categories: , ,

Additional information

Day

Same Day, Next Day

Related products

  • Cutting Wheels

    DYMAXION Cutting Disc Ferrous and Stainless Steels
    • Suitable for cutting ferrous and stainless steels (inox).
    • High cutting performance.
    • Thin cut off discs reduce wastage.
    • Fast cutting for extended battery life in cordless tools.
    • Do not exceed maximum safe speed of 80m/s.
    • Complies with DIN EN 12413 European standard and AS1788.1-1987 Australian standard.
    • Cutting disc must be mounted correctly as per machine manufacturer’s specifications.
    • Metal guards must be fitted and used on all machines.
    • If cutting disc is chipped,cracked or damaged it must not be used, and needs to be replaced.
    • Equal diameter flanges must be fitted. Flanges must be a minimum 1/3 diameter of cutting disc.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Cutting Wheels

    DYMAXION Diamond Saw Blades Turbo Rim for porcelain and granite
    • Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
    • Turbo blades feature a continuous rim with an edge that is serrated.
    • This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
    Levels

    OX Levels

    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Cutting Wheels

    DYMAXION Diamond Saw Blades Segmented Rim for concrete, brick and pavers
    • General purpose.
    • Great for cutting a wide variety of non-abrasive materials.
    • Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
    • Use when cutting cured concrete, reinforced concrete, clay bricks, hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick & concrete.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page