[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

MILWAUKEE SHOCKWAVE™ Red Helix™ Titanium 19 Pce Kit

In Stock
SKU: 48894860 Categories: ,

Related products

  • Bright Finish HSS

    BORDO Wire Gauge Bright Finish HSS Jobber Drill Set
    • Bordo Wire Gauge Quick Silver M2-HSS Twist Drills.
    • 118° Split Point (crankshaft point).
    • Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
    • 118° point angles are ideal for use in materials such as mild steel and cast iron.
    • The 118° point creates easily controlled chips which are wide and thin.
    • Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
    • These tools are suitable for general purpose use, particularly for non-ferrous applications.
    • Gauge size drill calculations are generally made utilising a reference book or table.
    • For example, to drill a hole which is 10 thou (thousandth of an inch = .001) bigger than a 1/8? bolt, the user must first work out that 1/8? is 125 thou, so the required hole size is 135 thou. Using a reference table establishes that you would need a number 29.
    • Number drill bit gauge sizes are analogous to, but different from, American wire gauge.
    • Number gauge is most commonly used from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest).
    • Number gauge is actually defined down to size 97, but these smallest sizes are very rarely used.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Cobalt HSS-Co5

    BORDO Cobalt HSS-Co5 Jobber Drill Metric
    • Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
    • DIN338
    • 135° Split Point (crankshaft point).
    • Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
    • The 135° point should be used to cut harder steel materials especially in deep hole applications.
    • In these situations it will produce thicker chips minimising work hardening of the cavity.
    • Faster penetration reduces abrasion and friction along the cutting edges.
    • Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
    • Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Delta Point Bright Finish HSS

    BORDO Delta Point Bright Finish HSS Metric
    • Bordo Metric Delta Point M2-HSS Twist Drills.
    • DIN338
    • Delta Point drills have a multi-faceted cutting tip.
    • Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
    • The overall length of the cutting edge significantly exceeds that of conventional drills.
    • This means more edge doing the cutting and the results are simply extraordinary.
    • Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
    • During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
    • DRILLS FASTER LASTS LONGER.
    • Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Colour Band

    BORDO Blue Band HSS-Co TiAlN Stainless Steel Drilling Metric
    • Bordo Metric Blue Band HSS-Co TiAlN Coated Twist Drills for Stainless Steel.
    • DIN338
    • Multi-faceted point with two helical flutes with 35 degrees of helix angle.
    • The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
    • The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
    • TiAlN coating increases tool surface hardness to 87Rc.
    • For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page