MILWAUKEE METAL CUT-OFF WHEEL 3 PACK
The Milwaukee® 49943000 is a three pack of 76mm x 1mm x 10mm (3” x .040″ x 3/8”) cut-off wheels. Rated for a maximum 21,000 RPM this disc is an ideal solution for cutting stainless steel and other metals quickly and efficiently. These metal cut-off wheels are suitable for use with the M12 FUEL™ Cut-Off Tool (M12FCOT-0).
Related products
-
Sockets & Wrenches
MILWAUKEE 1/4” DRIVE SOCKET RAIL CLIPS
Our Socket Rail Clips are interchangeable for rail customisations based on your socket storage needs. Our Socket Rails work with all chrome and impact sockets and are offered in 1/4″, 3/8″, and 1/2″ drive. Removeable end caps make the rail adjustments easy. The MILWAUKEE® Rail Clip 10 Packs are available in 1/4″ drive (49666739), 3/8″ drive (49666740), and 1/2″ drive (49666741).
(0 reviews) -
Cable Feeding
MILWAUKEE FISH STICK TIP ACCESSORY KIT – 3 PIECE
Our 3-piece Fish Stick Accessory Kit includes a bullet nose, hook, and whisk tip. The larger whisk slides over obstacles and can be used with other accessories. The all metal bullet nose and hook provide you with extra durability while using the tool. All Milwaukee® electrical fish stick accessories are compatible with all of our electrical fish sticks.
(0 reviews) -
Cutting Wheels
DYMAXION Diamond Saw Blades Mesh Rim for ceramic tiles and stone
- Mesh Rim blades have softer bonds for cutting hard materials such as tile, porcelain, marble, and other materials that can chip easily.
- These blades have a thin 1.5mm kerf to minimise surface chipping and reduce cutting friction.
- Most continuous rim and mesh rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting Wheels
DYMAXION Diamond Saw Blades Turbo Rim for porcelain and granite
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page