Additional information
| Weight | 0.18 kg |
|---|---|
| Dimensions | 20 × 20 × 5 cm |
LINQ Rope Kernmantle 15m
- Code RKRG015
- Kernmantle rope with thimble eye & rope grab
- Durable & highly visible orange rope
- 15M length
Related products
-
Height SafetyLINQ Harness Essential – Standard (M-L)
- Code H101
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Padding under buckles
- Service Pouch on back
(0 reviews) -
LINQLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Roofers Kit Standard – H201 Harness
- Code KITRSTDH201
- LINQ Tactician Riggers harness H201
- WLO1SNSN Shock Absorbing Webbing Lanyard Single Leg (with 2 x Snap Hooks) x 1
- RKRG015 Rope kernmantle with thimble eye & rope grab. 15M with permanently attached shock absorbing 450mm assembly and screw gate karabiner
- HSASE2515 Anchor Strap Endless 25mm – 1.5M x 1
- KSGSA18 Screw Gate Karabiner x 2
- Kernmantle rope exceeds 14.7kN
- 110gm of polyester as opposed to 65gm. This results in exceptional strength capabilities
- Rope grab as per restraint technique, in order to ensure stopping force is less than 6kN, rope grab should always be used in conjunction with a shock absorbing element
- Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment
- Drop forged lanyard hardware for added strength in case of extreme conditions
- Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
- Pebble weave webbing provides maximum grip precluding incidental buckle slippage
- Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
- Retro-reflectivity built into webbing
- 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard
- Articulated chest and shoulder straps adjustment points designed for female wearers
- Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
- Unique to LINQ – Green for safely locked – Red for not locked feature / indicator
- Available with Kit Bag, Round Bucket or Square Bucket
(0 reviews) -
LanyardsLINQ Lanyard Double Leg, Snap Hook, Scaff Hook x 2
- Code WLE2SNSD
- 1.85M Elasticated Lanyard
- WLE2- Double Leg Elasticated Lanyard + hardware (see list below)
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment.
- Drop forged lanyard hardware
- Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
- Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyardâ??s webbing strength.
- Australian designed, engineered, and MADE.
- Webbing Tenacity= 23kN.
- Webbing is UV rated to meet AS/NZS 1891.1 standard
- THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly.
- BSI Certified and approved to AS/NZS 1891.1
- SN – Snap Hook
- SD – Scaffold Hook Double Action Steel Alloy 68mm
(0 reviews)
