Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 28 × 6.5 × 2.5 cm |
LINQ Anchor Tetha V-Bar Straight 280mm
- Code HSTBS280
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 280mm size all purpose metal roofs
- Conforms to ASNZS 1891.4 requirements
Related products
-
Height SafetyLINQ Harness Supreme EDI Tower Worker – Standard (M-L)
- Code H402
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment.
- Liqui-Pel Technology for liquid protection, also easier to clean the harness.
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation.
- Retro-Reflective Thread in webbing for improved visibility in low light.
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices.
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head.
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements.
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker.
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap.
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use.
- Padded Sub Pelvic Seat for Pole Strap restraint High Comfort spec.
- Large Pole Strap Side Loops for ease of connecting Pole Strap (work positioning).
- Adjustable Waist Belt with tool loop attachments.
- Quick Release Buckles. Padding under buckles.
- Forward placed pole strap attachment points makes for easier to reach connection.
- Service Pouch on back.
- Comes with Harness Bag PART CODE: NBHAR.
(0 reviews) -
Height SafetyLINQ Harness Essential – Standard (M-L)
- Code H101
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Padding under buckles
- Service Pouch on back
(0 reviews) -
Height SafetyLINQ Harness Elite Riggers – Standard (M-L)
- Code H301
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
(0 reviews) -
Height SafetyLINQ Elite Single Leg Elasticated Lanyard with Hardware
- WLE1- Single Leg Elasticated Lanyard + hardware (see list below)
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment.
- Drop forged lanyard hardware
- Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
- Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyards webbing strength.
- Unique stretchable lanyard design that minimises length of lanyard, preventing tripping or snagging.
- Australian designed, engineered, and made.
- Webbing Tenacity= 23kN.
- Webbing is UV rated to meet AS/NZS 1891.1 standard
- THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly.
- BSI Certified and approved to AS/NZS 1891.1
- SN – Snap Hook x2
(0 reviews)
