Additional information
| Weight | 1.6 kg |
|---|---|
| Dimensions | 41 × 40 × 5 cm |
LINQ Anchor Tetha T-Bar
- Code HSTBA
- The LINQ Tetha T Bar anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Suitable for Fall Arrest application on metal roofs.
- To be used on metal clad roofs only
- Conforms to ASNZS 1891.4 requirements
Related products
-
Height SafetyLINQ Elite Single Leg Elasticated Lanyard with Hardware
- WLE1- Single Leg Elasticated Lanyard + hardware (see list below)
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment.
- Drop forged lanyard hardware
- Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
- Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyards webbing strength.
- Unique stretchable lanyard design that minimises length of lanyard, preventing tripping or snagging.
- Australian designed, engineered, and made.
- Webbing Tenacity= 23kN.
- Webbing is UV rated to meet AS/NZS 1891.1 standard
- THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly.
- BSI Certified and approved to AS/NZS 1891.1
- SN – Snap Hook x2
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon Harness
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height SafetyLINQ Anchor Tetha V-Bar Straight 280mm
- Code HSTBS280
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 280mm size all purpose metal roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Tool LanyardsGRIPPS Coil Tether Single Action 1kg
Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.
Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.
The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.
Key Features
- Two lightweight single-action carabiners.
- Suitable for holsters, belts, pouches & harnesses.
- Low profile & lightweight design.
- Extra thick PU coated stainless steel coil.
- Heat & cut resistance.
Specifications
- Min Length: 40cm / 16″
- Max Length: 1.6m / 63″
- Max Load: 1.0kg / 2.2lbs
- Two Single-Action Carabiner
(0 reviews)