LINQ 2m Rope Kermantle
2m Rope Kernmantle c/w RG13D with Perm KTASA26 Ers Cover & Snap Hook to Thimble
Related products
-
Tool ConnectorsGRIPPS Tool Catch (Non-Conductive)
Tool Catch (Non-Conductive) – 12mm x 55mm (10 Pack)
The GRIPPS® Non-Conductive Tool Catch offers a sturdy, dependable, and long-lasting retrofit certified, load-rated, and non-conductive tool connection point when used with GRIPPS® V-Gripp Tape, suitable for a live electrical environment.
The GRIPPS® Non-Conductive Tool Catch is designed to provide a retrofit tool connection point suitable for a live electrical environment.
Secure the GRIPPS® Non-Conductive Tool Catch onto your tool using GRIPPS® V-Gripp Tape to establish a certified, load-rated, non-conductive tool connection suitable for a range of hand tools.
Installation Instructions
- Cut a length of GRIPPS® V-Gripp Tape approximately 30cm/12″ (or enough to go around the tool 10 times).
- Position the GRIPPS® Tool Catch on the tool.
- Apply GRIPPS® V-Gripp Tape , pulling it tight and without covering the “ring” on the GRIPPS® Tool Catch.
(0 reviews) -
AccessoriesGRIPPS Little Gripper Kit
If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.
Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.
Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.
Key Features
- Moulded from custom German-engineered TPU compounds.
- No additional adhesives or tools are required for application.
- UV-protected for long-lasting outdoor use.
- Compatible with tool shafts of all shapes & thicknesses.
Kit Contents:
- 2 x Size #1 Little Gripper
- 2 x Size #2 Little Gripper
- 2 x Size #3 Little Gripper
- 2 x Size #4 Little Gripper
- 4 x GrippLink Connectors
Specifications
Size Tool Shaft Diameter Max Load
(Without GrippLink)Max Load
(With GrippLink)#1 3.5mm – 6.0mm
0.1″ – 0.2″0.5kg
1.1lbs1.0kg
2.2lbs#2 5.5mm – 9.0mm
0.2″ – 0.3″0.5kg
1.1lbs1.0kg
2.2lbs#3 8.0mm – 13mm
0.3″ – 0.5″0.5kg
1.1lbs2.5kg
5.5lbs#4 12mm – 16mm
0.5″ – 0.6″0.5kg
1.1lbs2.5kg
5.5lbs(0 reviews) -
AccessoriesGRIPPS Kevlar Cable Retractor Unit with Auto-Stop
The GRIPPS® Kevlar Cable Retractor Unit with Auto-Stop presents an optimal compact solution for tethering small tools weighing up to 0.5kg / 1.1lb.
With smooth and precise extension capabilities of up to 1.2m / 47in, these retractors guarantee tools are consistently within reach.
The Kevlar’s locking mechanism secures the cable at length during tool operation, enhancing ease and efficiency.
(0 reviews) -
Tool ConnectorsGRIPPS V-Gripp Tape & Tool Catch Kit
GRIPPS® V-Gripp Tape uses self-vulcanising technology to create a load rated tool connection point without the use of any adhesives.
Utilising innovative self-vulcanising technology, GRIPPS® V-Gripp Tape establishes a load-rated tool connection point without the need for adhesives.
Compatible with the GRIPPS® Tool Catch and GRIPPS® Tool Hitch range, this tape offers effortless application, bonding instantly upon contact with itself.
Engineered to withstand heat, water, and oil, GRIPPS® V-Gripp Tape delivers exceptional durability, making it an ideal choice for on-site and extreme working environments.
Installation Instructions
- Cut a length of GRIPPS® V-Gripp Tapeapproximately 30cm/12″ (or enough to go around the tool 10 times).
- Position the GRIPPS® Tool Catch on the tool.
- Apply GRIPPS® V-Gripp Tape, pulling it tight and without covering the “ring” on the GRIPPS® Tool Catch.
(0 reviews)
