LANOTEC Anti Spatter

Related products

• 

  Chemicals, Lubricants & Adhesives

  SIKA Sikaflex®-252

  Elastic adhesive for vehicle assembly bonding

  Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.

  • Bonds well to a wide variety of substrates
  • Capable of withstanding high dynamic stresses
  • Good gap-filling properties

  • Bonds well to a wide variety of substrates
  • Capable of withstanding high dynamic stresses
  • Good gap-filling properties
  • Can be painted
  • Vibration-damping
  • Electrically non-conductive

  Usage

  Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

  (0 reviews)

  Add to Quote
• 

  Cleaners

  CRC Mass Air Flow Sensor Cleaner 300g

  Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.

  Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles

  Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower

   

  (0 reviews)

  Add to Quote
• 

  Chemicals, Lubricants & Adhesives

  SIKA Sikaflex®-291

  Multifunctional adhesive sealant for marine applications

  Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
  Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).

  • Bonds well to a wide variety of substrates
  • Good ageing and weathering resistance
  • Elastic

  • Bonds well to a wide variety of substrates
  • Good ageing and weathering resistance
  • Elastic
  • Low odour
  • Non-corrosive
  • Can be over painted
  • Can be sanded

  Usage

  Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

  (0 reviews)

  Add to Quote
• 

  Chemicals, Lubricants & Adhesives

  SIKA SikaSeal® Roof & Gutter

  1-component neutral cure roof and gutter silicone sealant

  SikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
  SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.

  • Neutral cure
  • Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
  • Non-sag

  • Roofs
  • Gutters
  • Polycarbonate roof sheeting
  • Around plumbing fixtures and penetrations
  • General interior & exterior sealing around the home

  Advantages

  • Neutral cure
  • Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
  • Non-sag
  • Great tooling characteristics
  • Interior and exterior usage
  • Fast curing
  • Minimum movement capability ±25%
  • High temperature resistance (-40°c to +150°c)

  (0 reviews)

  Add to Quote