[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

KLEIN TOOLS Digital Multimeter Electrical Test Kit

  • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
  • Meter also test batteries, diodes and continuity
  • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
  • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
  • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
  • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
  • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
  • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device

In Stock
SKU: MM320KIT Categories: , , , ,

Related products

  • Diagnostic Tools

    INSTRUMENT CHOICE WindLog – Wind Data Logger
    ICWindlog
    The WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.
    The WindLog samples data every second and stores both average and gust readings at the user-selected interval. User selectable logging intervals range from 1-minute to 1-hour. The 2 MB memory can record for over three months at a 1-minute rate and store over a years worth of wind data at a 10-minute logging interval.
    The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour. Wind extension cables that separate the wind sensor from the WindLog are available in 50-foot or 100-foot length. The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings.
    The data logger operates on 3 AA Alkaline or Lithium batteries. Batteries are not included. Lithium batteries are recommended for cold environments. The typical life should be around six months. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The WindLog ships with a 15-foot USB cable.
    Each WindLog ships with a free Windows-based application, WindSoft. The software uses an SQLite database to track and record wind information. While connected, WindSoft will update the database every minute. Downloaded data is integrated into the database. By combining both logged and real-time data, the WindLog can be used both online and offline. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files.
    The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. The mast may also be attached to a support structure using U-bolts or lag screws.
    3 Year Warranty (2 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
    Wind Log Features:
    – 2MB flash memory data logger
    – Mini-Aervane wind sensor
    – WindSoft free software package
    – Support mast
    – 15-ft USB Cable
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
    • High quality diagnostic tool
    • 2-Way pressure and vacuum test functions
    • Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
    • High volume efficiency in both pressure and vacuum modes
    • Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
    • Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
    • High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
    • Custom blow mold storage case

    DUAL MODE PRESSURE AND VACUUM FUNCTIONS:

    Pressure Mode:

    • Monitor turbo charger boost pressure
    • Test and adjust turbo charger waste gate actuators
    • Test pressure operated central locking systems
    • Test fuel tank vent valves
    • Test one way valves
    • Diagnose small engine faults
    Vacuum Mode:

    • Test EGR valve
    • Test fuel pressure regulator
    • Test map sensor
    • Test thermal vacuum switches
    • Test electric vacuum switches
    • Test one way valves
    • Test HVAC valves
    • Test automatic transmission modulator valve
    • Test central locking systems
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Moisture Meter For Wood & Building Materials With Thermometer

    0560-6062

    In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site

    • Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
    • Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
    • Hold function for easy readout of readings
    • Display illumination
    • Self-test function
    • Protective cap for safe storage
    • Including wrist strap and belt holder
    • Measurement of temperature and humidity in ambient air
    • Air humidity measurement with the long-term stable Testo humidity sensor
    • Incl. dewpoint calculation and wet bulb

    Storage temperature: -40 to +70 C
    Operating temperature: -10 to +50 C
    Battery type: 2 batteries Type AAA
    Battery life: 130 h
    Weight: 90 g
    Dimensions: 119 x 46 x 25 mm

    Probe type NTC
    Meas. range: -10 to +50 C
    Accuracy: 0.5 C
    Resolution: 0.1 C

    Probe type Conductive measurement cell
    Meas. Range: 0 to 50%
    Accuracy: 1%
    Resolution: 0.1
    Probe type: humid. sensor, cap.
    Meas. Range: 0 to 100 %RH
    Accuracy: 2.5 %RH (5 to 95 %RH)
    Resolution: 0.1 %RH

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Mechanics Stethoscope
    • High grade instrument made from quality materials
    • Metal ear piece and thick flexible tubing
    • Quality diaphragm assembly
    • Assists in locating abnormal mechanical sounds within a component
    • Ensures targeted sounds are transmitted clearly
    • Minimises phantom and background noises
    • A probe length of 285mm and tube length of 600mm
    • Extra reach when working in confined areas
    • An essential diagnostic tool for fault finding in vehicle engines and engine bays,under-body, transmissions, differentials & bearings
    (0 reviews)
    Add to Quote