KINCROME Digital Multimeter – Manual Ranging
Related products
-
Diagnostic ToolsSP TOOLS Adjustable Advance Timing Light
- Quickly tune-up cars, trucks, marine and recreational vehicles
- Works on conventional, electronic and computer controlled ignition systems on both adjustable and nonadjustable timing systems
- Patented Skip circuitry – Tests up to 10,000RPM
- Dial type timing advance (0˚- 60˚ score)
- Heat resistant metal inductive pick-up
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark
- Easy access slim-line barrel
- Optical correct lens
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsSP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
- High quality diagnostic tool
- 2-Way pressure and vacuum test functions
- Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
- High volume efficiency in both pressure and vacuum modes
- Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
- Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
- High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
- Custom blow mold storage case
DUAL MODE PRESSURE AND VACUUM FUNCTIONS:
Pressure Mode: - Monitor turbo charger boost pressure
- Test and adjust turbo charger waste gate actuators
- Test pressure operated central locking systems
- Test fuel tank vent valves
- Test one way valves
- Diagnose small engine faults
Vacuum Mode: - Test EGR valve
- Test fuel pressure regulator
- Test map sensor
- Test thermal vacuum switches
- Test electric vacuum switches
- Test one way valves
- Test HVAC valves
- Test automatic transmission modulator valve
- Test central locking systems
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:Features:– Simple to use, easy to maintain, multiple applications.– Interchangeable gas sensor heads.– Field replaceable long life Lithium battery (up to 8 hours).– Minimum, maximum and average readings.Specifications:– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F– Reading functions: Instant, minimum, maximum, average– Sensor head: Interchangeable, replaceable– Display status indicators: Battery, sensor, standby– Sensor calibration: Zero and gain calibration– Analog output: 0-5 V– Digital Interface: RS-232 to USB– Data logging: Up to 8,188 records (2706 incl. Temp/RH)– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.– Clock function: Real time– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RHParticulate Matter Sensor features and specifications:The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.– Range: 0.000 to 1.000 mg /m3– Measurement Parameters: PM2.5 and PM10– Sensor Type: Laser particle counter– Minimum Detection Limit: 0.001 mg/m3– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)– Resolution: 0.001 mg/3– Response Time: 5 Seconds– Temp: 0 to 40C– Relative Humidity: 0 to 90% non-condensating(0 reviews)