[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

KINCROME 24 Piece HSS Drill Bit Set – Metric

Contents
Sizes: 1.0, 1.5, 2.0, 2.5 (2), 3.0 (2), 3.5 (2), 4.0 (2), 4.5, 5.0 (2), 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0mm

In Stock
SKU: K21845 Categories: ,

Related products

  • Metal Drilling

    KINCROME 4-20mm Spiral Step Drill – 1/4″ Hex
    Specifications
    Brand KINCROME
    Coating Titanium Aluminium Nitride (TiAIN)
    Shank 1/4″ Hex
    Warranty Kincrome Quality
    Colour Black
    Material M2 High Speed Steel (HSS)
    Length (mm) 88
    Width (mm) 20
    Height (mm) 20
    Weight (kg) 0.15
    Features
     4-20mm (9-steps)
     Dual-spiral flute design
     Titanium Aluminium Nitride (TiAIN) coating
     1/4″ hex shank
     Suitable for use with impact drivers
    (0 reviews)
    Add to Quote
  • Metal Drilling

    KINCROME 4-30mm Spiral Step Drill – 1/4″ Hex
    Specifications
    Brand KINCROME
    Coating Titanium Aluminium Nitride (TiAIN)
    Shank 1/4″ Hex
    Warranty Kincrome Quality
    Colour Black
    Material M2 High Speed Steel (HSS)
    Length (mm) 115
    Width (mm) 30
    Height (mm) 30
    Weight (kg) 0.2
    Features
     4-30mm (14-steps)
     Dual-spiral flute design
     Titanium Aluminium Nitride (TiAIN) coating
     1/4″ hex shank
     Suitable for use with impact drivers
    (0 reviews)
    Add to Quote
  • Bright Finish HSS

    BORDO Wire Gauge Bright Finish HSS Jobber Drill
    • Bordo Wire Gauge Quick Silver M2-HSS Twist Drills.
    • 118° Standard Chisel Point
    • Chisel point is ideal for general purpose drilling.
    • 118° point angles are ideal for use in materials such as mild steel and cast iron.
    • The 118° point creates easily controlled chips which are wide and thin.
    • Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
    • These tools are suitable for general purpose use, particularly for non-ferrous applications.
    • Gauge size drill calculations are generally made utilising a reference book or table.
    • For example, to drill a hole which is 10 thou (thousandth of an inch = .001) bigger than a 1/8″ bolt, the user must first work out that 1/8″ is 125 thou, so the required hole size is 135 thou. Using a reference table establishes that you would need a number 29.
    • Number drill bit gauge sizes are analogous to, but different from, American wire gauge.
    • Number gauge is most commonly used from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest).
    • Number gauge is actually defined down to size 97, but these smallest sizes are very rarely used.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Cobalt HSS-Co5

    BORDO Cobalt HSS-Co5 Jobber Drill Fractional Set
    • Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
    • ANSI B94-11
    • 135° Split Point (crankshaft point).
    • Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
    • The 135° point should be used to cut harder steel materials especially in deep hole applications.
    • In these situations it will produce thicker chips minimising work hardening of the cavity.
    • Faster penetration reduces abrasion and friction along the cutting edges.
    • Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
    • Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page