ITM Macc 400mm 240v / 1h 3,000rpm Non Ferrous Cutting Saw With Pneumatic Vice & Coolant Spray
Features
- Italian made quality, extra heavy-duty.
- Compound mitre, non-ferrous metal cutting saw.
- Designed for cutting aluminium, copper, brass etc.
- Swivel head 45 right and left.
- Mitre head 45 left.
- Trigger switch operation.
- Twin manual sliding vices with teflon jaws.
- Includes Stand
- Fully recirculating coolant system.
- As per TA400, with additional pneumatic features.
1. Two pneumatic spring return vices, automatically clamps the material when the trigger switch is pulled.
2. Supply of cutting fluid to the blade is also activated.
3. Material is then released upon return of cutting head, & fluid mist de-activated. - Safety emergency stop switch.
- 12 months warranty.
- Blade sold separately.
- Compressor required to power vice.
Specifications
- Italian made quality, extra heavy-duty.
- Compound mitre, non-ferrous metal cutting saw.
- Designed for cutting aluminium, copper, brass etc.
- Swivel head 45 right and left.
- Mitre head 45 left.
- Trigger switch operation.
- Twin manual sliding vices with teflon jaws.
- Includes Stand
- Fully recirculating coolant system.
- As per TA400, with additional pneumatic features.
1. Two pneumatic spring return vices, automatically clamps the material when the trigger switch is pulled.
2. Supply of cutting fluid to the blade is also activated.
3. Material is then released upon return of cutting head, & fluid mist de-activated. - Safety emergency stop switch.
- 12 months warranty.
- Blade sold separately.
- Compressor required to power vice.
Out of stock
Related products
-
BandsawsITM Macc Inclined Table Loader To Suit 411ag, 391avg, 702ga And Nta370g
Features
Material loader with inclined plane for automatically loading bundles of metal bars, tubes, solid bars, round, square and rectangular section in to bandsaws and circular saws. When the tail of the bar is no longer workable (scrap) the loader sends a new bar that expels the the previous scrap and positions the new bar for cutting the butting, the cycle is repeated until the bars positioned on the loader are exhausted.The inclined plane has of length of 1025mm, with adjustment of the loading angle. It is possible for example to load 8 solid round bars 120mm.
12 months warranty.Specifications
To suit MB-411AG-3, MB-391AVG-3, MB-702GA-3 and MB-NTA370G-3LOADER CAPACITY:
- Minimum material length 2m
- Maximum material length 6m
- Maximum load weight capacity 5000kg
- Loader weight 1200kg ~
- Power supply direct connection to the machine
LOADABLE MATERIAL:
- Round tubes or solid sections
- Min. 16mm max , 120mm
- Square section tubes or solids
- Min. 16 x 16mm
- Max. 100 x 100mm
Product does not include bandsaw pictured.
(0 reviews) -
BandsawsITM Macc Bandsaw, Fully Auto Dual Column, With Touch Screen Control Panel, 350mm Cap, 15-100mpm, 415v 3ph
Features
- Italian made quality.
- Fully enclosed design in order to guarantee highest safety and a clean and healthy working place, as well as an easy access to the machine.
- Dual column design cuts solid material faster and with increased finish quality.
- Fully automatic C.N.C. machine.
- 10″ Touch screen control panel.
- 39 Programs, each with 50 steps with relevant piece-counter.
- Digital control of quality and cut length.
- Blade cleaning device and washdown hose.
- Recirculating coolant system.
- Safety emergency stop switch.
- 12 months warranty.
- Optional software for creating a series of cutting profiles from a computer for use on the MB-350A
Specifications
Motor 5.36hp Three Phase (415V) Blade Speed Variable Speed 15 – 100mpm Blade Size 34mm x 1.1mm x 4900mm Weight 2000kg Cutting Capacity Cutting Angle Solid Round Solid Square Round Square 90° 320mm 320mm 350mm 350mm (0 reviews) -
BandsawsITM Bandsaw, 180mm Cap, 4 Speed, 240v 1ph, Horizontal & Vertical Cut
Features
- Horizontal & vertical cutting bandsaw.
- Quick positioning swivel vice enables cuts from 0° to 45°.
- Fully adjustable hydraulic down feed with separate on/off valve & automatic shut-off at end of cut.
- Incorporated recirculating coolant system.
- Non-voltage return ON/OFF switch & emergency stop switch.
- 4 Blade speeds allows precise cutting of different materials.
- Brass chip brush to help extend blade life.
- Adjustable material stop for repetitive production.
- Fitted on base with wheels for easy manoeuvring.
- 12 months warranty.
- Comes complete with blade.
- Made in Taiwan.
Specifications
Motor 1hp Single Phase (240V) Blade Speed 4 Speed 22 / 33 / 45 / 65mpm Blade Size 19mm x 0.9mm x 2360mm Bed Height 572mm Weight 130kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 180mm 180mm 300 x 180mm 45° Right 110mm 110mm 120 x 115mm (0 reviews) -
BandsawsITM Macc Bandsaw, Semi Auto, 390mm Cap, Swivel Head, Dual Mitre, 22-73mpm Variable Speed,415v 3ph
Features
- Italian made quality.
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Semi-automatic machine.
- Dual direction heavy-duty vice.
- Variable blade speed 22 – 73 mpm.
- Incorporated recirculating coolant system.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 month warranty
- Comes complete with stand & blade.
Specifications
Motor 2.95hp Three Phase (415V) Blade Speed Variable 22-73 mpm Blade Size 34mm x 1.1mm x 4610mm Weight 820kg Cutting Capacity Cutting Angle Solid Round Round Square Rectangle 90° 150mm 400mm 400mm 400 x 550mm 45° Right 150mm 400mm 380mm 300 x 420mm 60° Right 150mm 280mm 280mm 400 x 280mm 45° Left 150mm 400mm 380mm 300 x 410mm 60° Left 150mm 260mm 260mm 400 x 230mm (0 reviews)