ITM Holemaker Pro 35 Magnetic Base Drill with Permanent Magnet System
Increased safety as machine cannot fall or break away from job if power is lost, due to the permanent rare earth magnetic base.
Quality, Compact & Robust European Made Machine.
Ideal for onsite & overhead tasks.
Gravity feed coolant system with magnetically attached bottle.
Comes complete in metal carry case.
Specifications
- Capacity ( Diameter ): 35mm
- Capacity ( Depth ): 45mm
- Motor Power: 920 Watt
- Input Power: 950 Watt Single Phase 240V
- Speed: 350rpm
- Magnetic Dead Lift: 6000Nm On 25mm Steel Plate
- Stroke: 70mm
- Height: 320 / 390mm
- Weight: 13kg
Out of stock
Related products
-
Magnetic Base Drilling Machines
ITM Holemaker Special 140 Magnetic Base Drill
The Holemaker Special 140 is a highly versatile European made machine for professional drilling and tapping applications, featuring the latest innovations in drilling machine technology. The machine’s forward & reverse work modes with variable speed adjustment allows thread cutting up to M42 of through holes and M33 blind holes.
Features
- New generation Italian made motor
- Intelligent speed control system maintains stable speed regardless of load changes
- Electronic Variable Speed Control
- Electronic clutch
- Overload and Overheat protection
- Tilt sensor stops the motor in cases of machines break away
- 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
- Intuitive control panel at top of the drill
- Very light weight
- Supplied in a metal carry case with cutter guard & safety strap
* Tapping applications require optional tapping head and collets
Specifications
- Capacity ( Diameter ): 150mm
- Capacity ( Depth ) : 110mm
- Twist drill capacity: 47mm
- Tap capacity: M42
- #4 Morse Taper spindle
- 2150 Watt 240V motor
- 4 Speed variable gearbox (55-85 / 100-150 / 200-300 / 350-520rpm)
- Lightweight, only 31kg
- 25000Nm Magnetic dead lift on 25mm steel plate
- 260mm Stroke
- Height 634mm min / 894mm max
Supplied with arbor for use with 3/4″ shank Holemaker cutters up to 75mm diameter and 75mm depth of cut. Optional arbor for 1-1/4″ shank cutters up to 150mm diameter and 110mm depth.
(0 reviews) -
Magnetic Base Drilling Machines
ITM Holemaker Pro 52 Magnetic Base Drill
New generation machines with the latest technology and design.- New Rigid Frame Design
Provides increased life of cutting tools. - New Extra Large 165mm Stroke
Enables the use of long tooling such as extension arbors and large depth cutters for drilling box section steel in one pass, twist drills, reamers, taps etc. - Magnetic Field Shape Control (MFSC)
Provides maximum holding power on thin materials. - Lightweight & Powerful
The new generation Holemaker machines are lighter and more powerful than other brands on the market.
Features:
- Multi-purpose machine able to use Holemaker cutters, no. 2 Morse taper shank drills & reamers, as well as a drill chuck
- Industrial 2-speed gearbox
- Cast-iron motor housing
- Through spindle coolant system, with an external side mounted gravity feed coolant tank
- Left or right hand feed handle operation
- Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience
- Smart magnet technology to ensure sufficient magnetic adhesion
- Supplied in a blow mould plastic carry case
- Suitable for steel fabrication, engineering workshops & maintenance facilities where a heavy-duty versatile machine is highly beneficial
- Supplied complete with arbor for use with Holemaker cutters up to 50mm depth of cut (3/4″ shank)
- #2MT drill chuck SA20102 available separately
Specifications
- Capacity (Diameter): 52mm
- Capacity (Depth): 52mm
- Capacity (Twist Drills): #2 Morse Taper 23mm
- Motor Power: 1100 Watt
- Input Power: 1200 Watt Single Phase 240V
- Speed: 2 Speed 240 / 480rpm
- Weight: 16.5kg
- Magnetic Dead Lift: 9,900Nm On 25mm Steel Plate
- Stroke: 165mm
- Height (Min. / Max.): 456mm / 616mm
(0 reviews) - New Rigid Frame Design
-
Magnetic Base Drilling Machines
ITM Holemaker Air 45, Fully Atex 11 Certified Pneumatic Magnetic Base Drill
The HMP45 is a compact portable pneumatic powered drilling machine which allows hole cutting up to 45mm diameter and 52mm depth using Holemaker cutters. The No. 2 Morse Taper spindle allows a wide range of tooling to be used with the machine.
The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.Both the machine and the body of the HMP45-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.
Specifications
Capacity ( Diameter ): 45mm
Capacity ( Depth ): 52mm
Capacity ( Twist Drill ): #2 Morse Taper 23mm
Motor: Power 800 watt Pneumatic, 1400L/min
Speed: 2 Speed 190 / 290rpm
Weight: 19.0kg
Magnetic Dead Lift: 7500Nm On 25mm Steel Plate
Height: 690mm min / 750mm max
Stroke: 150mm
Through Spindle Coolant System
Supplied In Metal Carry Case With Cutter Guard & Safety Strap(0 reviews) -
Magnetic Base Drilling Machines
ITM Holemaker Special 60 Magnetic Base Drill
The Holemaker Special 60 is a highly versatile European made machine for professional drilling and tapping applications, featuring the latest innovations in drilling machine technology. The machine’s forward & reverse work modes with variable speed adjustment allows thread cutting up to M20 of through holes and blind holes.
Features
- New generation Italian made motor
- Intelligent speed control system maintains stable speed regardless of load changes
- Electronic Variable Speed Control
- Electronic clutch
- Overload and Overheat protection
- Tilt sensor stops the motor in cases of machines break away
- 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
- Intuitive control panel at top of the drill
- Very light weight
- Supplied in a durable blow mould carry case with cutter guard & safety strap
* Tapping applications require optional tapping head and collets
Specifications
- Capacity ( Diameter ): 60mm
- Capacity ( Depth ): 75mm
- Twist drill capacity: 23mm
- Tap capacity: M20
- #2 Morse Taper spindle
- 1500 Watt 240V motor
- 2 Speed variable gearbox (160-250 / 390-580rpm)
- Lightweight, only 17kg
- 11000Nm Magnetic dead lift on 25mm steel plate
- 190mm Stroke
- Height 500mm min / 690mm max
(0 reviews)