[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655
ITM Holemaker Pipe Attachment Single Chain

ITM Holemaker Pipe Attachment Single Chain

Features

Adapt your Holemaker machine to use on pipe. Can be used on any ferrousand non-ferrous materials.
Suit Pipe 80mm To 250mm.
Maximum Base Dimensions: 95 x 204mm

Out of stock

SKU: SAPA-1 Categories: ,

Related products

  • ITM Drill Chuck & Adaptors
    Magnetic Base Drill Accessories

    ITM Drill Chuck & Adaptors

    Complete setup to adapt your Holemaker machine to use twist drill bits.

    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • ITM Holemaker Air 200 Pneumatic Magnetic Base Drill
    Magnetic Base Drilling Machines

    ITM Holemaker Air 200 Pneumatic Magnetic Base Drill

    Features

    The PRO200A is a new pneumatic portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity.
    The spindle bore is No.5 Morse Taper and the drill chuck is 1-1/4″ Weldon. The PRO200A is a robust design built with modular construction and can be handled by a single operator.

    Features:.
    2 speeds – ideal for drilling and tapping.
    Integrated air processing module.
    2 x 14700Nm magnetic adhesion force.
    Adaptive magnets, can work on curved or flat surfaces.
    Integrated swarf guard.
    Reverse.

    Both the machine and the body of the PRO200A drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    Specifications

    The PRO200A is a new pneumatic portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity.
    The spindle bore is No.5 Morse Taper and the drill chuck is 1-1/4″ Weldon. The PRO200A is a robust design built with modular construction and can be handled by a single operator.

    Features:.
    2 speeds – ideal for drilling and tapping.
    Integrated air processing module.
    2 x 14700Nm magnetic adhesion force.
    Adaptive magnets, can work on curved or flat surfaces.
    Integrated swarf guard.
    Reverse.

    Both the machine and the body of the PRO200A drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    (0 reviews)
    Add to Quote
  • ITM Holemaker Pilot Pins
    Pins

    ITM Holemaker Pilot Pins

    A pilot pin serves three main purposes:.
    Ejects the slug at the end of the cut.
    Provides coolant feed into the centre of the cutter.
    Locates the centre of the cut

    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • ITM Holemaker Air 35 Fully Atex 11 Certified, Pneumatic Magnetic Base Angle Drill
    Magnetic Base Drilling Machines

    ITM Holemaker Air 35 Fully Atex 11 Certified, Pneumatic Magnetic Base Angle Drill

    The HMP35AD is a small portable pneumatic drilling machine which allows holes to be drilled up to 35mm diameter in places with restricted space, using standard 3/4″ Weldon Shank cutters. This machine is the lowest height pneumatic magnetic drill currently available on the world market. The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.
    *12mm twist drill capacity using Weldon Shank twist drill bits.

    Both the machine and the body of the HMP35AD-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    Specifications

    Capacity ( Diameter ): 35mm
    Capacity ( Depth ): 25mm
    Motor: 800 Watt pneumatic, 1400L/min
    Weight: 17.0kg
    Height: 183mm Constant Working Height
    Stroke: 39mm
    Magnetic Dead Lift: 6500Nm On 25mm Steel Plate
    Through Spindle Coolant System
    Supplied In Metal Carry Case With Cutter Guard & Safety Strap
    (0 reviews)
    Add to Quote