Edge Finder, End Style, 10mm Shank.
Edge & Centre Finders are time saving positioning tools for use in jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, centre points & scribed lines.
Manufactured from precision ground tool steel, these are case hardened 45-48HRC.
The diameter & concentricity are controlled to within 0.0002″ (5 microns).
| Edge Finder | END STYLE, 0.20" TIP 3/8" SHANK, END STYLE, 10MM SHANK, END STYLE, 0.20" TIP 1/2" SHANK, COMBINATION EDGE & CENTRE FINDER, 0.20"TIP 3/8"SHANK, DOUBLE EDGE FINDER, END STYLE, 0.20" TIP 1/2" SHANK, MIDDLE STYLE, 10MM SHANK, ELECTRONIC & AUDIBLE EDGE FINDER, 0.40" BALL 3/4" SHANK |
|---|
Manufactured from high grade tool steel fully hardened to 55-60 HRC.
Manufactured and numbered in matched pairs, each pair has two 90° Vees of different capacities which are identical to the Vees of its matching block. The Vee’s are ground central, parallel and square with the ends and sides.
These Vee Blocks are very useful for holding work securely during drilling, milling and grinding operations and also in layout and inspection work. Each pair of Vee Blocks comes complete with a pair of rigid and robust clamps.
Permissible Height difference between matched pairs – Within 0.0002″ (5 microns).
Parallelism and Squareness of Vee grooves with respect to all surfaces – Within 0.0003″ (8 microns).
Parallelism of opposite faces of Vee Blocks – Within 0.0003″ (8 microns).
Squareness of adjacent exterior faces of Vee Blocks – Within 0.0003″ (8 microns).
Flatness of Working Faces – Within 0.0002″ (5 microns)
The rigid and robust construction of the range of knurling tool holders makes them ideal for countless knurling applications.
Knurling Tool Holders – 3 pairs.
The revolving head is fitted with standard left and right pattern knurls in fine, medium and coarse pitch. Any pair can be brought to bear on the workpiece, thus 3 different knurling patterns are obtainable without changing the tool.
Knurling Tool Holder – 1 pair.
A two knurl holder ideal for small knurling applications, it has a self adjusting pivot head which ensures that the knurl finds the centre line of the work exactly. It comes complete with one right and one left hand knurl.
Knurling Tool Holder – 1 Knurl.
Single knurl holders, these are useful for light duty applications. They come complete with one straight knurl.
Manufactured from high quality carbon steel, solid construction and no moving parts. Fully hardened for increased resistance to wear. Hardness of tip 60-63 HRC, these centres are accurately ground and have a TIR of ± 0.0001″ (±2.5 microns).
Tungsten Carbide Tip for increased durability, requiring less down time for regrinding.