ITM Bench Grinder Stand
Features
Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200
Specifications
Height: 760mm
Weight: 11.5g
Weight: 11.5g
Out of stock
Related products
-
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 915x50mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 2″ (915 x 50mm) belt – 100 Grit
- 7″ (178mm) diameter disc – 120 Grit
- 3 1/2″ (89mm) diameter rubber contact wheel
- 5 1/2″ (140mm) diameter drive wheel
- Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards
(0 reviews) -
Grinding MachinesITM Buffer Machine 240V, 550W, 200mm
Features
Powerful 550W Induction Motor.
Safety lock On/Off switch.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Stop motor for maximum performance.
Includes 200mm x 14mm stitched polishing mops.Specifications
Motor Power: 550W
Speed: 2850RPM
Wheel Size: 200mm x 14mm
Spindle Thread: M16 x 2mm
Weight: 11.5kg(0 reviews) -
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 1220x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 4″ wide (1220 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 484 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1 HP.
- Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
- NOTE: This is an attachment only.
(0 reviews) -
Grinding MachinesITM Stand to Suit ITM 12″ Bench Grinder
Features
- Top plates to suit up to 12″ bench grinders
- Very strong & sturdy design
- Large base plate with multiple mounting holes
- Large water parts bin
*Bench grinder and accessories not included.
Specifications
Height: 805mm(0 reviews)