ITM Belt Grinder 1.5Kw 240V 1PH With Stand Belt Size 100 x 1500mm
Features
Quality, durable construction.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.
Specifications
Motor: 1.5KW Single Phase 240V
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm
Out of stock
Related products
-
Grinding MachinesITM Bench Grinder 415V, 3 Phase, 900W, 250mm
Features
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
Specifications
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
(0 reviews) -
Grinding MachinesITM Industrial 10″ Bench Grinder, 415V 3PH, 250 x 38mm Wheels
Features
High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at it’s true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failuresSpecifications
Wheel Diameter: 250mm (10″)
Wheel Width: 38mm
Bore: 25.4mm
Motor Power: 1.3HP (1.0kW)
Voltage: 415V
Speed: 2850rpm
Weight: 43Kgs
Thread Size: 1″ – 8TPI BSW
Switch: Standard(0 reviews) -
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 915x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 4″ wide (915 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 364 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits grinder shafts sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
(0 reviews) -
Grinding MachinesITM Stand to Suit ITM 12″ Bench Grinder
Features
- Top plates to suit up to 12″ bench grinders
- Very strong & sturdy design
- Large base plate with multiple mounting holes
- Large water parts bin
*Bench grinder and accessories not included.
Specifications
Height: 805mm(0 reviews)