[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

INSTRUMENT CHOICE Multi-Function 4 in 1 Thermometer

The LM-8000A is a four-in-one anemometer, humidity reader, light meter and thermometer. Its rugged and lightweight design was created to make it easy to use in the field. Each of the measurements is highly accurate, and the unit stores maximum and minimum data for each of its functions.

The LM-8000As data hold feature makes it easy to use even. The unit has a built-in microprocessor circuit to ensure excellent accuracy and performance.

Each of the units four functions is performed via the usage of the latest high-tech equipment. 

What does the LM-8000A measure?
Temperature
Humidity
Wind Speed/Air Velocity
Light
The Instrument Choice "1 + 1 Year Extended Warranty" is provided free of charge on this item, giving you a 2 year warranty (1 year manufacturers warranty plus the exclusive 1 bonus year Instrument Choice Warranty). The extended warranty is not valid for the batteries or if the units calibration has had normal deviation. (This extended warranty is valid for purchases of this item made after 28-8-15).

Features
Four-in-one Anemometer, Hygrometer, Thermometer and Light Meter.
Suitable for one-handed operation
Hold button freezes the current reading
Internal temperature and humidity sensor
Stores the minimum and maximum readings for all four settings
Highly accurate low-friction ball vane wheels design
Utilises a standard type K thermocouple outlet
Performance and accuracy are supplied by the built-in microprocessor circuit

Specifications
Measures temperatures from 0 to 50C (Internal Thermistor)
Measures temperatures from -100 to 1300C (Thermocouple input)
Measures light from 0 to 20,000 Lux 
Measures relative humidity from 10 to 95 percent
Measures air velocity from 80 to 5910 ft/min, 0.4 to 30.0 m/s, 1.4 to 108.0 km/h, 0.9 to 67.0 mile/h and 0.8 to 58.3 knots 

Power Requirements
006P DC 9V battery

Measurements
156 mm x 60 mm x 33 mm 

Warranty

24 Months

In Stock
SKU: LM-8000A Categories: , , ,

Related products

  • Diagnostic Tools

    INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

    IC-PM-500

    This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

    Series 500 Lithium Air Quality Portable Monitor features and specifications:
    Features:
    – Simple to use, easy to maintain, multiple applications.
    – Interchangeable gas sensor heads.
    – Field replaceable long life Lithium battery (up to 8 hours).
    – Minimum, maximum and average readings.
    Specifications:
    – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
    – Reading functions: Instant, minimum, maximum, average
    – Sensor head: Interchangeable, replaceable
    – Display status indicators: Battery, sensor, standby
    – Sensor calibration: Zero and gain calibration
    – Analog output: 0-5 V
    – Digital Interface: RS-232 to USB
    – Data logging: Up to 8,188 records (2706 incl. Temp/RH)
    – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
    – Clock function: Real time
    – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
    – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
    – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
    – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
    – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
    – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
    Particulate Matter Sensor features and specifications:
    The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
    – Range: 0.000 to 1.000 mg /m3
    – Measurement Parameters: PM2.5 and PM10
    – Sensor Type: Laser particle counter
    – Minimum Detection Limit: 0.001 mg/m3
    – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
    – Resolution: 0.001 mg/3
    – Response Time: 5 Seconds
    – Temp: 0 to 40C
    – Relative Humidity: 0 to 90% non-condensating

     

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1

    SMART AUTOMOTIVE TESTING

    The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.

     

    5 TOOLS IN 1

    BATTERY ANALYSER

    • Two test modes – Out-of-car Inspection and In-car Inspection
    • Analyses battery health and calculates the actual cold starting ability of the battery
    • Battery bar code scanning for rapid test setup
    • Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
    • Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
    • Built-in printing functionality provides instant hard copy test results

     

    TPMS TESTER (Tyre Pressure Monitoring System)

    • Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
    • Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
    • Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
    • Reads tyre pressure data, including pressure, tyre temperature, battery status and more
    • Can read/copy/write sensor ID value.

     

    DIAGNOSTICS TESTER

    • Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
    • Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
    • Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
    • Identifies which systems are installed on the vehicle
    • Views and captures (records) real-time Live Data and saves the data in text format
    • 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
    • Update vehicle diagnostic software and APK
    • Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
    • Able to run actuation test to access vehicle-specific subsystem and component tests

     

    VEHICLE MAINTENANCE

    This module provides an easy dial to quickly access the most commonly performed service functions as follows:

    • Oil Reset Service
    • Electronic Parking Brake Reset
    • Steering Angle Calibration
    • ABS Bleeding
    • Gear Learning
    • IMMO Service
    • Injector Coding
    • TPMS (Tyre Pressure Monitor System) Reset
    • Battery Maintenance System (BMS) Reset
    • Diesel Particulate Filter (DPF) Regeneration
    • Electronic Throttle Position Reset
    • AFS (Adaptive Front-lighting System) Reset
    • AdBlue Reset (Diesel Engine Exhaust Gas Filter)
    • Gearbox Matching
    • Sunroof Initialisation
    • Suspension Calibration
    • EGR Adaption
    • Windows Calibration
    • Seats Calibration
    • Tyre Reset
    • Language Change
    • A/F Reset
    • Coolant Bleed
    • Transport Mode
    • NOx Sensor Reset
    • Stop/Start Reset

     

    VIDEOSCOPE SUPPORT

    (Available as an attachment – SP61173*)

    With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly

     

    KIT INCLUDES

      • SP Smart Tool
      • Diagnostic cable – DLC
      • Battery cable clamps
      • USB Type-C cable
      • 12v auxiliary power outlet cable
      • OBD I adaptor box
      • Non-16pin adaptor cable kit

    All Housed in a heavy duty Blow Mold Case

    SPECIFICATIONS

    • Operating system: Android 10
    • Memory: 4GB
    • Storage: 64GB
    • Screen: 5.99” Capacitive touch screen
    • Resolution:720 x 1440 pixels
    • Camera: Rear-facing 8.0MP camera
    • Wi-Fi: 2.4GHz/5GHz dual band
    • Battery: 4500mAh/7.6v
    • Working temperature: 0 to 45°c
    • Storage temperature: -10 to 60°c

     

    CONNECTIVITY

    • DB15 Diagnostic connector
    • USB Type A port x 1 + USB Type C port
    • Circular connector for battery tester clamps
    • OBD-II, OBD-I (Includes adaptor cables)
    • Wi-fi internet connection
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE WR-3 Plus Wireless Anemometer Kit

    WR3PKit

     

    The WR-3 Plus Wireless Anemometer is a reliable and stable solution for measuring wind speed in a variety of industries, including construction, marine, film production, scaffolding, and wind farms. With a range of up to 500m, this wireless anemometer offers real-time measurement of wind speed, temperature, and air pressure.
    One of the key features of the WR-3 Plus is its instant wind speed alarm. Users can set a wind speed warning limit based on local operation safety standards, and the device will trigger an audible and visual alarm if the limit is reached. This feature is especially important in the construction and crane industries, where windy conditions can pose a potential danger to workers and equipment. With the WR-3 Plus, multiple stakeholders can be notified on-site through the device’s unique wireless address and connection to several displays.

    – Ultra-long wireless transceiver range of up to 500m

    – Audible and visual wind speed alarm
    – Data recording for up to 1 year
    – Measurements for wind speed, temperature, and air pressure
    – Sensor battery life of up to 3 years
    – Waterproof and impact resistant design with an IP67 rating
    – Fast and secure magnetic installation kit
    In addition to its real-time measurement capabilities, the WR-3 Plus also offers data recording for up to 1 year. This is made possible by the device’s 64MB built-in memory and impressive battery life. The recorded data can be easily exported in Excel format for further analysis, making it a valuable tool for tracking and improving safety measures in various industries.
    The WR-3 Plus also boasts a user-friendly interface with a large, backlit LCD display. This display clearly indicates live weather data in various units of measurement, including live wind speed, average wind speed (with selectable averaging), maximum wind speed, ambient temperature, and atmospheric pressure. Users can also view hourly wind records and historical bar charts from the past 12 hours on different pages.

    – Large LCD backlit display with user-friendly interface

    – Ability to view live wind speed in various units of measurement
    – Option to view average wind speed with selectable averaging
    – Ability to view maximum wind speed
    – Ability to view ambient temperature
    – Beaufort bar graph for visual representation of wind strength
    – Wind chill calculation for temperature and wind speed combination
    – Atmospheric pressure display

    Other features of the WR-3 Plus include its fast and secure magnetic installation kit, IP67 waterproof and impact resistant design, and up to 3 years of sensor battery life. Overall, the WR-3 Plus is a reliable and essential tool for ensuring safety in windy conditions and a variety of industries.

    Warranty: 2 Years (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)

     

    Applications include:

    – Construction and cranes

    – Marine, ports, and offshore operations
    – Film production and outdoor entertainment
    – Scaffolding and temporary structure use
    – Rigging and communications industry

    – Wind farms and turbines

    Specifications
    Wind Speed Sensor:

    – Unit: m/s, knots, MPH, km/hr

    – Range: 0.3 to 50 m/s
    – Resolution: 0.1 m/s/0.1 knots/0.1 MPH/0.1 km/hr

    – Accuracy: 2% FS

    Temperature Sensor:

    – Unit: C/F

    – Range: -30C to 60C
    – Resolution: 0.1C/0.1F

    – Accuracy: 1C

    Atmospheric Pressure Sensor:

    – Unit: hPa/mmHg/bar

    – Range: 500 to 1100 hPa
    – Resolution: 1 hPa/0.1 mmHg/0.001 bar

    – Accuracy: 4 hPa

    Wireless Sensor:

    – Frequency: 868MHz(default), 915MHz

    – Distance: Max 500m* (depends on the applied environment)
    – Data rate: Every 2 seconds
    – Power supply: 1x 3.6V 18505 Lithium battery
    – Waterproof rating: IP67
    – Weight: 406g

    – Dimensions: 262.5 x 183.5 x32mm

    Data Logger:

    – Receiver buzzer: > 80dB

    – Built-in memory: 64MB
    – Output: .xlxs, .xls
    – Data logger” wind speed, temperature, atmospheric pressure
    – Logging interval: 2s, 5s, 10s, 1min, 5 mins, 10 mins, 60 mins
    – Power supply: 3x 1.5V AA battery, Micro USB port
    – Dimensions: 189.6 x 75.6 x 36.3mm
    – Weight: 205g
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe

    SET INCLUDES:

    • Alligator Clip Test Lead Set
    • Standard Probe Test Lead Set
    • Suits all SP Multimeters

    ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG

    • Insulated finger guarded alligator clips for easy application
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A

    STANDARD PROBE TEST LEAD SET TO BANANA PLUG

    • Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A
    (0 reviews)
    Add to Quote