INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:
Features:
– Simple to use, easy to maintain, multiple applications.
– Interchangeable gas sensor heads.
– Field replaceable long life Lithium battery (up to 8 hours).
– Minimum, maximum and average readings.
Specifications:
– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
– Reading functions: Instant, minimum, maximum, average
– Sensor head: Interchangeable, replaceable
– Display status indicators: Battery, sensor, standby
– Sensor calibration: Zero and gain calibration
– Analog output: 0-5 V
– Digital Interface: RS-232 to USB
– Data logging: Up to 8,188 records (2706 incl. Temp/RH)
– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
– Clock function: Real time
– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
Particulate Matter Sensor features and specifications:
The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
– Range: 0.000 to 1.000 mg /m3
– Measurement Parameters: PM2.5 and PM10
– Sensor Type: Laser particle counter
– Minimum Detection Limit: 0.001 mg/m3
– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
– Resolution: 0.001 mg/3
– Response Time: 5 Seconds
– Temp: 0 to 40C
– Relative Humidity: 0 to 90% non-condensating
Related products
-
Diagnostic ToolsKLEIN TOOLS Insulation Resistance Tester
- Voltage Tester tests insulation resistance up to 4000MΩ at 125V, 250V, 500V and 1000V DC
- Megohmmeter with test and lock buttons for simple insulation testing
- Warning alarm and high voltage icon for detection of voltage
- Measures up to 1000V AC/DC, resistance and continuity
- Automatic ranging True Root Mean Square (TRMS) technology for increased accuracy
- Backlit display with bar graph, Auto-Power Off, High Voltage, Max/Min and Hold icons
- Low battery indicator with easily replaceable battery and fuse
- Built-in stand and optional magnetic hanger for hands-free operation
- Test verification of conformity to EN61557-1,-2,-4
- CAT IV 600V and CAT III 1000V safety rating
- Includes Right Angle Test Leads and Heavy-Duty Alligator Clip Test Leads
(0 reviews) -
Diagnostic ToolsSP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe
SET INCLUDES:
- Alligator Clip Test Lead Set
- Standard Probe Test Lead Set
- Suits all SP Multimeters
ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG
- Insulated finger guarded alligator clips for easy application
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
STANDARD PROBE TEST LEAD SET TO BANANA PLUG
- Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
(0 reviews) -
Diagnostic ToolsSP TOOLS Digital Multimeter with Temperature Gauge – Pocket Size
- 2000 counts digital display
- Safety Design Cat 3 600v
- Non-contact ACV detection
- Data hold
- Auto ranging
- Type K temperature input
- Continuity, diode test, resistance
- Auto power off with low battery indicator
- Pocket sized
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE WindLog – Wind Data Logger
ICWindlogThe WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.The WindLog samples data every second and stores both average and gust readings at the user-selected interval. User selectable logging intervals range from 1-minute to 1-hour. The 2 MB memory can record for over three months at a 1-minute rate and store over a years worth of wind data at a 10-minute logging interval.The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour. Wind extension cables that separate the wind sensor from the WindLog are available in 50-foot or 100-foot length. The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings.The data logger operates on 3 AA Alkaline or Lithium batteries. Batteries are not included. Lithium batteries are recommended for cold environments. The typical life should be around six months. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The WindLog ships with a 15-foot USB cable.Each WindLog ships with a free Windows-based application, WindSoft. The software uses an SQLite database to track and record wind information. While connected, WindSoft will update the database every minute. Downloaded data is integrated into the database. By combining both logged and real-time data, the WindLog can be used both online and offline. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files.The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. The mast may also be attached to a support structure using U-bolts or lag screws.3 Year Warranty (2 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)Wind Log Features:– 2MB flash memory data logger– Mini-Aervane wind sensor– WindSoft free software package– Support mast– 15-ft USB Cable(0 reviews)