Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
LINQ Harness Essential – Standard (M-L)
- Code H101
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Padding under buckles
- Service Pouch on back
Related products
-
Height SafetyGRIPPS Adjustable Two-Way Radio Holster
Compatible with virtually every Two-Way Radio on the market, the Adjustable Radio Holster is also compatible with other small electronic devices such as phones and cameras.
Easily mounted to either work belts or harnesses, the Adjustable Radio Holster uses a two-way Velcro mounting sleeve to secure itself to the user.
Use in conjunction with a GRIPPS® Coil E-Tether With E-Catch.
Key Features
- Compatible with all standard work belts.
- Fully adjustable to be compatible with virtually all Two-Way Radios.
- Suitable for use with all small electronic devices such as phones & cameras.
- Easily mountable to work belts or harnesses via a two-way Velcro mounting sleeve.
Kit Contents
- 1 x Two-Way Radio Holster
- 1 x Non-Conductive Coil E-Tether With Poly Clip
- 1 x E-Catch
Specifications
- Max Load: 0.5kg / 1.1lbs
- CONFORMS TO ANSI/ISEA 121-2018
(0 reviews) -
Height SafetyLINQ Anchor Tetha T-Bar
- Code HSTBA
- The LINQ Tetha T Bar anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Suitable for Fall Arrest application on metal roofs.
- To be used on metal clad roofs only
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Harness Supreme EDI Tower Worker – Standard (M-L)
- Code H402
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment.
- Liqui-Pel Technology for liquid protection, also easier to clean the harness.
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation.
- Retro-Reflective Thread in webbing for improved visibility in low light.
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices.
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head.
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements.
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker.
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap.
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use.
- Padded Sub Pelvic Seat for Pole Strap restraint High Comfort spec.
- Large Pole Strap Side Loops for ease of connecting Pole Strap (work positioning).
- Adjustable Waist Belt with tool loop attachments.
- Quick Release Buckles. Padding under buckles.
- Forward placed pole strap attachment points makes for easier to reach connection.
- Service Pouch on back.
- Comes with Harness Bag PART CODE: NBHAR.
(0 reviews) -
Tool LanyardsGRIPPS Screwlock Cable
The Screwlock Cable provides a quick, easy and cost-effective way to create a certified, load-rated tool connection point for tools with a suitable existing hole.
With a core band made from aircraft-grade steel, the load-rated and certified Screwlock Cable is as dependable as it is hard-wearing.
Create your secure tool connection point by simply threading the Screwlock Cable through a suitable existing hang-hole/slot in your tool, and screw closed. Add a drop of thread-locking compound before you screw shut to create a permanent load rated connection point on your tools.
Key Features
- PU coated aircraft-grade steel.
- Easy to maintain & swap between tools.
- Easy installation process that can be performed on-site.
- Can be locked permanently using thread locking compounds.
- Available in four sizes.
Specifications
- Size: 3mm x 150mm / 0.1″ x 6.0″
- Max Load: 1.0kg / 2.2lbs
Conforms to ANSI/ISEA121-2018
(0 reviews)
