Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
LINQ Harness Elite Riggers – Standard (M-L)
- Code H301
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
Related products
-
Height SafetyLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon Harness
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height SafetyLINQ Wrist Strap to Tool Connection
- Code WST
- Coiled tool connector provides compact tool retention
- Plastic coating for durability and comfort
- 2 x Swivel Snap Hooks to reduce tangling
- Maximum tool weight not to exceed 0.8 kg
- Strap Material: Stainless Steel/PE
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Weight: 40 grams
- One size fits all
- Maximum Working Load Limit: 0.8kg
(0 reviews) -
AccessoriesGRIPPS Little Gripper Kit
If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.
Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.
Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.
Key Features
- Moulded from custom German-engineered TPU compounds.
- No additional adhesives or tools are required for application.
- UV-protected for long-lasting outdoor use.
- Compatible with tool shafts of all shapes & thicknesses.
Kit Contents:
- 2 x Size #1 Little Gripper
- 2 x Size #2 Little Gripper
- 2 x Size #3 Little Gripper
- 2 x Size #4 Little Gripper
- 4 x GrippLink Connectors
Specifications
Size Tool Shaft Diameter Max Load
(Without GrippLink)Max Load
(With GrippLink)#1 3.5mm – 6.0mm
0.1″ – 0.2″0.5kg
1.1lbs1.0kg
2.2lbs#2 5.5mm – 9.0mm
0.2″ – 0.3″0.5kg
1.1lbs1.0kg
2.2lbs#3 8.0mm – 13mm
0.3″ – 0.5″0.5kg
1.1lbs2.5kg
5.5lbs#4 12mm – 16mm
0.5″ – 0.6″0.5kg
1.1lbs2.5kg
5.5lbs(0 reviews)
