[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

GRIPPS Tool Catch (Non-Conductive)

Tool Catch (Non-Conductive) – 12mm x 55mm (10 Pack)

The GRIPPS® Non-Conductive Tool Catch offers a sturdy, dependable, and long-lasting retrofit certified, load-rated, and non-conductive tool connection point when used with GRIPPS® V-Gripp Tape, suitable for a live electrical environment.

The GRIPPS® Non-Conductive Tool Catch is designed to provide a retrofit tool connection point suitable for a live electrical environment.

Secure the GRIPPS® Non-Conductive Tool Catch onto your tool using GRIPPS® V-Gripp Tape to establish a certified, load-rated, non-conductive tool connection suitable for a range of hand tools.

Installation Instructions

  1. Cut a length of GRIPPS® V-Gripp Tape  approximately 30cm/12″ (or enough to go around the tool 10 times).
  2. Position the GRIPPS® Tool Catch on the tool.
  3. Apply GRIPPS® V-Gripp Tape , pulling it tight and without covering the “ring” on the GRIPPS® Tool Catch.

In Stock
SKU: H01007-10 Categories: ,

Related products

    Accessories

    GRIPPS Little Gripper Kit

    If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.

    Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.

    Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.

    Key Features

    • Moulded from custom German-engineered TPU compounds.
    • No additional adhesives or tools are required for application.
    • UV-protected for long-lasting outdoor use.
    • Compatible with tool shafts of all shapes & thicknesses.

     

    Kit Contents:

    • 2 x Size #1 Little Gripper
    • 2 x Size #2 Little Gripper
    • 2 x Size #3 Little Gripper
    • 2 x Size #4 Little Gripper
    • 4 x GrippLink Connectors

    Specifications

    Size Tool Shaft Diameter Max Load
    (Without GrippLink)    		 Max Load
    (With GrippLink)
    #1  3.5mm – 6.0mm
    0.1″ – 0.2″    		 0.5kg
    1.1lbs    		 1.0kg
    2.2lbs
    #2  5.5mm – 9.0mm
    0.2″ – 0.3″    		 0.5kg
    1.1lbs    		 1.0kg
    2.2lbs
    #3 8.0mm – 13mm
    0.3″ – 0.5″    		 0.5kg
    1.1lbs    		 2.5kg
    5.5lbs
    #4 12mm – 16mm
    0.5″ – 0.6″    		 0.5kg
    1.1lbs    		 2.5kg
    5.5lbs
    (0 reviews)
    Add to Quote
  • Accessories

    SKYLOTEC Inceptor Head Pad

    With 6 millimetre thick padding, the high-quality HEAD PAD thin makes the INCEPTOR GRX pleasantly comfortable to wear. The interior padding can be exchanged very easily thanks to the Velcro fastening and is the ideal replacement item for making a worn INCEPTOR GRX seem almost like a new helmet. To extend its service life, this sweat-absorbing HEAD PAD is also easy to wash.

    (0 reviews)
    Add to Quote
    Accessories

    SKYLOTEC Lanyard Stowage Point

    This ring is designed to hang fasteners in it when they are not in use. It can be attached to the belt by means of a Velcro fastener. – Easy to attach to the belt – Provides space for fasteners while not in use

    (0 reviews)
    Add to Quote
    Accessories

    SKYLOTEC Visix

    This optimally shaped transparent all-purpose half visor protects the face from impacts and flying parts. The unique sealing lip prevents even the smallest particles from entering. It is made of polycarbonate with high impact protection. VISIX can be easily and quickly attached to the Gear Rack of any INCEPTOR GRX helmet without additional tools. When working, the visor can be flexibly adjusted to be worn lowered, at half height or upwards. It also provides exterior protection against scratches as well as fog protection from the inside. – Molded polycarbonate visor with high impact protection – Versatile, easy to fit – Compatible with all INCEPTOR GRX helmets

    (0 reviews)
    Add to Quote