GRIPPS Scaffolders Kit – 5-Tool Bungee & Coil
The fully tethered GRIPPS® Scaffolders Kit – 5-Tool Bungee & Coil comes fully assembled with five quality tools and certified GRIPPS® bungee and coil tool tethers, installed on a premium reinforced GRIPPS® Reinforced Synthetic Work Belt.
Lightweight, functional and extremely heavy-duty, these kits are engineered to provide today’s scaffolder with a tool system that out-performs expectations and is recognised as “best practice” in the industry.
Kit Content
| SKU | Description | Qty |
| H01119 | Reinforced Synthetic Work Belt | 1 |
| H02062 | Claw Hammer Holster – 2.5kg / 5.5lb | 1 |
| H02070 | Single Tool Holster | 1 |
| H02080 | Tape Measure Holster – 2.5kg / 5.5lb | 1 |
| H02090 | Ratchet/Wrench Holster – 2.5kg / 5.5lb | 2 |
| H01073 | Bungee Tether Dual-Action Swivel Carabiner – 7kg / 15lb | 1 |
| H01040 | Gripplock Cable – 3mm x 120mm | 4 |
| H01068 | Coil Tether Single-Action – 0.75kg / 1.65lb | 4 |
| H01102 | Seal Kit Bag – 20kg / 44lb | 1 |
| H02056 | Tape Measure Catch – 0.7kg / 1.5lb | 1 |
| D13001 | Ox Claw Hammer – 20oz | 1 |
| D17010 | Stabila Magnetic Scaffolders Level | 1 |
| D25010 | Scaffolders Tape Measure | 1 |
| D28313 | Shifter 10″ | 1 |
| K00070 | Scaffold Ratchet – 21mm – 24mm | 1 |
Related products
-
GRIPPSGRIPPS Dual-Arm Tool Hitch
The GRIPPS® Dual-Arm Tool Hitch loops through itself to create a simple yet strong choke and is suitable for heavy tools weighing up to 32kg / 71lb, such as crowbars and sledgehammers.The GRIPPS® Dual-Arm Tool Hitch loops through itself to create a simple yet strong choke. For “open” tools like a power drill, the GRIPPS® Dual-Arm Tool Hitch is secured against sliding up or down the handle by securing the single-arm with GRIPPS® V-Gripp Tape.
The tool is then tethered directly to a load-rated anchor point via the heavy-duty tool ring on the tail.
Max Load:32 kg | 71 lb(0 reviews) -
Belt KitsGRIPPS Belt-Loop Anchor
Compatible with all 50mm/2″ work belts, the GRIPPS® Belt-Loop Anchor creates an instant load-rated tether anchor on your work belt. Made from the same abrasion-resistant webbing as the GRIPPS® Webbing Tether Range, the GRIPPS® Belt-Loop Anchor is extremely hard-wearing.
Simply thread your work belt through the GRIPPS® Belt-Loop Anchor and connect your tether to the D-ring.
Max Load:2.5 kg | 5.5 lb
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Tool LanyardsGRIPPS Coil Tether Single Action 1kg
Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.
Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.
The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.
Key Features
- Two lightweight single-action carabiners.
- Suitable for holsters, belts, pouches & harnesses.
- Low profile & lightweight design.
- Extra thick PU coated stainless steel coil.
- Heat & cut resistance.
Specifications
- Min Length: 40cm / 16″
- Max Length: 1.6m / 63″
- Max Load: 1.0kg / 2.2lbs
- Two Single-Action Carabiner
(0 reviews) -
GRIPPSGRIPPS Dual-Arm Tool Hitch
The GRIPPS® Dual Arm Tool-Hitch features a simple choking mechanism, enabling it to securely fasten “open” tools such as crowbars and sledgehammers.The GRIPPS® Dual-Arm Tool Hitch loops through itself to create a simple yet strong choke. For “open” tools like a power drill, the GRIPPS® Dual-Arm Tool Hitch is secured against sliding up or down the handle by securing the single-arm with GRIPPS® V-Gripp Tape.
The tool is then tethered directly to a load-rated anchor point via the heavy-duty tool ring on the tail.
Max Load:16 kg | 35 lb(0 reviews)