FLUKE 87V Industrial Multimeter
Product overview: Fluke 87V Industrial Multimeter
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment – even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.
- Easy-access door for fast battery changes without breaking the calibration seal
- Analog bar graph for fast changing or unstable signals
- Large digit display with bright, two-level backlight for easier reading in low light
- Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Built to highest safety standards
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
Removable holster with built in test lead and probe storage for convenience
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.
Additional measurement features
The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty.
Related products
-
Diagnostic ToolsSP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
- High quality diagnostic tool
- 2-Way pressure and vacuum test functions
- Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
- High volume efficiency in both pressure and vacuum modes
- Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
- Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
- High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
- Custom blow mold storage case
DUAL MODE PRESSURE AND VACUUM FUNCTIONS:
Pressure Mode: - Monitor turbo charger boost pressure
- Test and adjust turbo charger waste gate actuators
- Test pressure operated central locking systems
- Test fuel tank vent valves
- Test one way valves
- Diagnose small engine faults
Vacuum Mode: - Test EGR valve
- Test fuel pressure regulator
- Test map sensor
- Test thermal vacuum switches
- Test electric vacuum switches
- Test one way valves
- Test HVAC valves
- Test automatic transmission modulator valve
- Test central locking systems
(0 reviews) -
Diagnostic ToolsSP TOOLS CAN OBDII/EOBD Scanner Code Reader
- Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
Note: This model is not compatible with Japanese manufactured vehicles using JOBD protocol. - Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
- Code definitions are displayed on unit screen
- Reviews the emission readiness status of OBDII Monitors
- Determines malfunction indicator lamp (MIL) status
- Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
- Reviews the live data on unit screen
- Easy to use with one plug in, highly reliable and accurate
- Stand-alone unit with no need for an additional laptop/computer to operate
- Small in size and comfortably fits in the palm of your hand
- Unit updates via internet by USB cable
- Software CD with over 10,000 DTC definitions included
- No batteries needed as the unit is powered via OBD2 cable
(0 reviews) - Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
-
Diagnostic ToolsINSTRUMENT CHOICE Multi-Function 4 in 1 Thermometer
The LM-8000A is a four-in-one anemometer, humidity reader, light meter and thermometer. Its rugged and lightweight design was created to make it easy to use in the field. Each of the measurements is highly accurate, and the unit stores maximum and minimum data for each of its functions. The LM-8000As data hold feature makes it easy to use even. The unit has a built-in microprocessor circuit to ensure excellent accuracy and performance.
Each of the units four functions is performed via the usage of the latest high-tech equipment.
What does the LM-8000A measure?
Temperature
Humidity
Wind Speed/Air Velocity
Light
Features
Four-in-one Anemometer, Hygrometer, Thermometer and Light Meter.
Suitable for one-handed operation
Hold button freezes the current reading
Internal temperature and humidity sensor
Stores the minimum and maximum readings for all four settings
Highly accurate low-friction ball vane wheels design
Utilises a standard type K thermocouple outlet
Performance and accuracy are supplied by the built-in microprocessor circuitSpecifications
Measures temperatures from 0 to 50C (Internal Thermistor)
Measures temperatures from -100 to 1300C (Thermocouple input)
Measures light from 0 to 20,000 Lux
Measures relative humidity from 10 to 95 percent
Measures air velocity from 80 to 5910 ft/min, 0.4 to 30.0 m/s, 1.4 to 108.0 km/h, 0.9 to 67.0 mile/h and 0.8 to 58.3 knotsPower Requirements
006P DC 9V batteryMeasurements
156 mm x 60 mm x 33 mmWarranty
24 Months
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter, TRMS Auto-Ranging, 1000V, Temp, Low Impedance
- Multimeter with automatic ranging True Root Mean Square (TRMS) technology for increased accuracy
- Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance, plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity
- High visibility, reverse contrast display with optical sensor, to automatically optimise viewability in dark or bright ambient lighting
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
- Low battery indicator and easily accessible battery and fuse compartment
- Tough meter is built to withstand a 6.6′ (2 m) drop and is rated IP42
- Includes carrying pouch, test leads, thermocouple with adapter, and batteries
- CAT IV 600 V safety rating
- For use in basic and controlled electromagnetic environments, such as residential, business and light-industrial locations
(0 reviews)