FLUKE 729 Automatic Pressure Calibrator
- Automatic pressure generation and regulation to 300 psi
- Configure procedures for pressure transmitters and switches
- Measure, source, and simulate 4 to 20 mA signals
- Troubleshoot and calibrate HART smart transmitters
- Automatically document test results
Related products
-
Pressure CalibratorsFLUKE 721Ex Precision Pressure Calibrator
The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
- Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
- Ideal for gas flow calibration (custody transfer) applications
- Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
- Pt100 RTD input for temperature measurement, (probe optional)
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units
- Large backlit graphic display can display up to three inputs simultaneously
- Store five instrument setups for recall and use
(0 reviews) -
Pressure CalibratorsFLUKE Calibration P3031 and P3032 Pneumatic Deadweight Testers
- Pressure ranges to 2000 psi (140 bar)
- 0.015% of reading accuracy (0.008% optional)
- Screw press for fine pressure control
- Piston flotation indicator
- Mounted spirit level with adjustable feet
- Series 3 non-magnetic stainless steel weights
(0 reviews) -
Pressure CalibratorsFLUKE Calibration P5515 Comparison Test Pump
- Generates pressures to 20,000 psi (1400 bar)
- Operational with a wide range of fluids
- Built-in hand pump for system priming and large volume applications
- High quality screw press for fine pressure control
- Acrylic reservoir for visibility of fluid level and quality
- Portable
(0 reviews) -
Pressure CalibratorsFLUKE 700PRV-1 Pressure Relief Valve Kit
The Fluke 700PRV-1 consists of a relief valve settable from 725 to 5800 PSI (50 to 200 bar) to be used with the 700HTP-1 Hydraulic Test Pump. The 1/8” NPT male thread to fits directly into the Fluke 700HTP-1 pressure pump.
To be used with the 700HTP-1 Hydraulic Test Pump. The 700PRV uses a multi-turn adjustment screw to set preload on internal disc springs. This relief valve will protect the most commonly used Fluke pressure modules and pressure instruments from damage due to accidental over-pressurization.
(0 reviews)