[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

FLUKE 725 Multifunction Process Calibrator

  • Easily source and measure process parameters
  • Calibrate temperature and pressure transmitters
  • Measure and source mA, Volts DC, frequency, and resistance
  • Built-in 24 V loop power supply
  • Store and recall frequently used calibration set ups
  • Simple controls and backlit display make it easy-of-use

In Stock
SKU: FLUKE 725 Categories: , , , , ,

Related products

  • Pressure Calibrators

    FLUKE Calibration P5515 Comparison Test Pump
    • Generates pressures to 20,000 psi (1400 bar)
    • Operational with a wide range of fluids
    • Built-in hand pump for system priming and large volume applications
    • High quality screw press for fine pressure control
    • Acrylic reservoir for visibility of fluid level and quality
    • Portable
    (0 reviews)
    Add to Quote
  • Pressure Calibrators

    FLUKE Calibration P3100 Hydraulic Deadweight Testers

    The P3100 models are available in single or dual piston format. Unit can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.

    Operating principle 
    Deadweight testers are the high performance pressure standards for pressure measurement. Utilizing the well proven piston-gauge system consisting of a vertically mounted, precision lapped piston and cylinder assembly, accurately calibrated weight masses (Force) are loaded on the piston (Area), which rises freely within its cylinder. These weights balance the upward force created by the pressure within the system. The pressure is measured when placed on a correctly spinning and floating piston. The total pressure measured is the summation of the weights plus the piston weight carrier assembly.

    Instrument base 
    There are three basic variations in the hydraulic offering; single low pressure, single high pressure and dual piston models. Pressure is generated and controlled by means of a high quality screw press located on the front of the tester. A built-in hand pump is included as standard for all hydraulic models to prime the system and accommodate large volume requirements.
    Piston/cylinder assemblies 
    The piston/cylinder assembly is the heart of each deadweight tester. They are manufactured from materials that provide stability, durability, and low thermal coefficients and distortion. Our experience and knowledge of piston/cylinder production and calibration ensure the precision and performance required for today’s demanding calibration requirements.
    Weight masses 
    Standard weight masses are series 3 nonmagnetic austenitic stainless steel. Each mass is marked with the serial number of the instrument and the nominal pressure value relative to the high or low-pressure piston, when applicable. Optional fractional weights are stainless steel and/or solution heat treated aluminum.
    Gravity correction 
    Gravity varies significantly with geographical location and this variation has a direct effect on the force of the weights and the accuracy of the deadweight tester. Each instrument can be calibrated to local gravity at no extra cost. If unspecified, instruments will be calibrated to Standard Gravity at 980.665 cm/s2.

    (0 reviews)
    Add to Quote
  • Pressure Calibrators

    FLUKE 3130-G2M Portable Pressure Calibrator
    • Measure/generate pressures from vacuum to 2 MPa (300 psi, 20 bar).
    • Measure/generate 4 to 20 mA, measures 0 to 30 V DC
    • Generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar).
    • External gas supply up to 2 MPa (300 psi, 20 bar).
    • Fine pressure adjustment.
    • Measurement accuracy of ± (0.025 % reading + 0.01 % FS).
    (0 reviews)
    Add to Quote
  • Pressure Calibrators

    FLUKE 730G Digital Pressure Calibrator
    • Pressure measurement from ±10 inH2O/2.5 kPa to 10000 psi/69 MPa
    • Four absolute pressure measurement ranges: 15 PSIA (103 kPa), 30 PSIA (207 kPa), 100 PSIA (690 kPa), 300 PSIA (2 MPa)
    • Pressure measurement accuracy 0.05% of full scale, 0.02% optional
    • Current measurement range: 0-24mA
    • Voltage measurement range: 0-30VDC
    • 0.01% current and voltage accuracy
    • Powerful HART communication, supports HART 7
    • 24V loop power, no external power supply needed
    • Lithium battery life: 25 hours continuously (without 24 V loop power), or 8 hours continuously (24 V loop power)
    • Storage up to 128 sets of calibration data
    • Ingress protection: IP54
    • 1-meter drop test
    • Three-year warranty
    (0 reviews)
    Add to Quote