FLUKE 717 Pressure Calibrator
- Measure pressure, 0.05% of full scale with internal sensor up to 5000 psi/345 bar sensor (5000G model)
- Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24 V loop power
- Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
- 1/8 NPT female pressure fitting
- Compatible with non-corrosive Gases and liquids
- Select eleven different engineering units
- Zero, min, max, and hold functions
- Calibrate P/I instruments with simultaneous pressure and current measurement
- Pressure switch test function captures set, reset and Deadband values of a pressure switch
- Error % calculation of mA measurements for quick pass-fail decisions
- Long lasting battery life
- Holster features test lead storage
- Compatible with Toolpack magnetic hanging system
- New switch test
Related products
-
Pressure CalibratorsFLUKE Calibration P3200 Hydraulic Deadweight Tester
The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
Options
PressCal software for pressure calculations and certificate generation
Operating principle
Deadweight testers are the high performance pressure standard for pressure measurement. Utilizing the well proven piston-gauge system consisting of a vertically mounted, precision lapped piston and cylinder assembly, accurately calibrated weight masses (Force) are loaded on the piston (Area), which rises freely within its cylinder. These weights balance the upward force created by the pressure within the system. The pressure is measured when placed on a correctly spinning and floating piston. The total pressure measured is the summation of the weights plus the piston weight carrier assembly.
Instrument base
There are three basic variations in the hydraulic offering; single low pressure, single high pressure and dual piston models. Pressure is generated and controlled by means of a high quality screw press located on the front of the tester. A built-in hand pump is included as standard for all hydraulic models to prime the system and accommodate large volume requirements.
Piston/cylinder assemblies
The piston/cylinder assembly is the heart of each deadweight tester. They are manufactured from materials that provide stability, durability, and low thermal coefficients and distortion. Our experience and knowledge of piston/cylinder production and calibration ensure the precision and performance required for today’s demanding calibration requirements.
Weight masses
Standard weight masses are series 3 nonmagnetic austenitic stainless steel. Each mass is marked with the serial number of the instrument and the nominal pressure value relative to the high or low-pressure piston, when applicable. Optional fractional weights are stainless steel and/or solution heat treated aluminum.
Gravity correction
Gravity varies significantly with geographical location and this variation has a direct effect on the force of the weights and the accuracy of the deadweight tester. Each instrument can be calibrated to local gravity at no extra cost. If unspecified, instruments will be calibrated to Standard Gravity at 980.665 cm/s2.
(0 reviews) -
Pressure CalibratorsFLUKE 718Ex Intrinsically Safe Pressure Calibrator
- ATEX II 1G Ex ia IIC T4 Compliant.
- Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve.
- 30, 100, and 300 psi ranges (2, 7, and 20 bar)
- Pressure measurement to 0.05% of full span, using an internal pressure sensor.
- Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules.
- Wide range of selectable measurement units for pressure.
- Current measurement with 0.02% accuracy and 0.001 mA resolution.
- Pressure switch test function.
- Min-Max Hold functions.
- Compact size and weight.
- Simple, push-button user interface.
- Rugged and reliable, ideal for field use.
(0 reviews) -
Multifunction CalibratorsFLUKE 753 Documenting Process Calibrator
Fluke 753 Documenting Process Calibrator helps you work smarter and faster
The Fluke 753 is a powerful multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software, and upload data for printing, archiving, and analysis. You’ll find it does the work of several tools, with simultaneous source and measurement capabilities for all common process parameters. It sources, simulates, and measures pressure, temperature, and electrical signals in one rugged, hand-held calibration tool. It also automates calibration procedures, captures data for documentation, and helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations.
The 753 includes a USB interface and a USB communication cable to enable two-way communication with DPCTrack 2 and other instrumentation management applications. To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.
Other useful features:
- Measures and sources pressure using any of 50 Fluke 700Pxx Pressure Modules
- Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
- Holds up to a full week of downloaded procedures and calibration results
- Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more.
- Offers compatibility with DPCTrack2 and many other asset management software packages
- Bright white dual display for reading both sourced and measured parameters simultaneously
- Easy-to-use multi-lingual interface
- Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use
- Comes with three-year warranty and DPC/Track trial software
(0 reviews) -
Pressure CalibratorsFLUKE 700G Pressure Gauge Calibrator
Portable, Precise, and Built for Field Calibration
Your Go-To Solution for Field Pressure Calibration
The Fluke 700G Series Pressure Gauge Calibrators are engineered specifically for field professionals who need rugged, accurate, and easy-to-use pressure measurement on the job. With a reputation for reliability and performance, the Fluke 700G is the ideal Fluke pressure gauge for demanding calibration and test applications.
Key Features of the Fluke 700G
- Extensive Pressure Range – Choose from 23 different models, covering ±10 inH2O/20 mbar up to 10,000 psi/690 bar. Whatever your field calibration needs, there’s a Fluke 700G pressure gauge that fits.
- High Accuracy – Standard accuracy is 0.05% of full scale. Reference class models deliver an impressive 0.04% of reading measurement accuracy, ensuring you always meet the most stringent requirements.
- Pressure Data Logging – Store up to 8,493 pressure measurements for later review. Use the 700G/TRACK software to upload, analyze, and report results right from your PC.
- Rugged Field Design – Fluke 700G pressure gauges are housed in a sealed IP67 enclosure and come with a protective holster. They are certified as intrinsically safe (CSA: Class 1, Div2, Groups A-D and ATEX: II 3 G Ex ic IIB T6 Gc), so you can work safely in hazardous or explosive environments.
- Long-Term Reliability – Every Fluke 700G pressure gauge is backed by a standard 3-year warranty for your peace of mind.
Simple, Complete Pressure Calibration—No Compromises
- Effortless Operation – Power on, connect to your pressure device, and read measurements instantly. No complex menus or setup—just fast, accurate pressure calibration in the field.
- Complete Solution with Pump Kits – Pair your Fluke 700G pressure gauge with the Fluke 700PTPK pneumatic or 700HTPK hydraulic pump kits for a complete sourcing and measurement solution. Premium pump kits (700PTPK2 and 700HTPK2) feature easy, no-tools-required connections for both the gauge and device under test.
- Versatile Calibration – Calibrate to 600 psi (20 bar) with the 700PTPK or 700PTPK2 pneumatic pump kit. Handle higher pressures using compatible hydraulic pump solutions.
Built for Field Professionals
- Portable and Lightweight – Take your Fluke pressure gauge anywhere. Designed for durability and ease of use in the harshest environments.
- Safe and Certified – Intrinsically safe certifications let you work confidently in classified areas where explosive gases may be present.
- Easy Connectivity – Premium kits provide “no tools required” setup for fast and secure calibration in the field.
Trust the Fluke 700G Series Pressure Gauge Calibrators for unmatched performance, ruggedness, and reliability. When accuracy and efficiency matter most, choose the Fluke 700G—your field calibration solution.
(0 reviews)