DYMAXION Core Drilling Machine 2000 Watt Hand Held 3 Speed 1.1/4 UNC Spindle
- Maximum 160mm diameter core drill in concrete and reconstituted limestone when using a drilling rig.
- Maximum 200mm diameter core drill in brick when drilling by hand.
- Heavy duty entry level trade focused core drill machine.
- Low 400-850 RPM speed for large diameter hand held coring in materials such as brick and limestone.
- High 1550-3450 RPM speed for small diameters used in chemical anchors and glass fence balustrading.
- RCD protection.
Related products
-
Drill Bits & Sets
SUTTON Jobber Drill Sets – Viper
Sutton Tools presents a breakthrough in twist drill technology, the revolutionary Viper Bit.
Drill Bits with bite!The Viper Bit has been developed specifically for the industrial trades person and the home handy person. For machine and hand held drilling in a wide range of ferrous & non-ferrous materials such as steel, aluminium, brass, wood & plastics. The Viper point design out-performs conventional HSS drill bits by delivering up to 2X faster drilling speeds. The 118° split point is self-centering, minimising wandering when starting and requires less pressure to be applied when drilling.
(0 reviews) -
Drill Bits & Sets
BORDO 4 Cutter Glass and Tile Drill Set
- 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
- Tungsten Carbide 4 Cutter Glass and Tile Drill Set
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews) -
Drill Bits & Sets
SUTTON Jobber Drill Sets – Blue Bullet
Sutton Tools Blue Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling ferrous metals. The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials.
(0 reviews) -
Drill Bits & Sets
BORDO Spade Bit 150mm
- Standard length 150mm Fast Cut Spade Bit
- Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
- The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
- Low cost per hole.
- Fast starting.
- Hex shank prevents slippage in drill chuck.
- Hex shank ensures a positive lock in spade bit extensions.
- Suits all standard quick change adaptors.
- Recommended speed 1500-2000 RPM.
- Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
- Do not use side to side movements when drilling.
- DO NOT USE HAMMER ACTION
- DO NOT USE FOR DRILLING METAL
- DO NOT EXCEED 2500 RPM
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page