MILWAUKEE DIAMOND TILE WHEEL
The Milwaukee® 49943010 is a 76mm x 1mm x 10mm (3” x .040″ x 3/8”) cut-off wheel. Intended to cut ceramic or porcelain tiles, either wet or dry, the 76mm (3″) disc diameter makes it easy for the user to manoeuvre the disc to make notch and rounded cuts to fit tiles as required. when paired with the Milwaukee M12 FUEL™ Cut-Off Tool (M12FCOT-0),
Related products
-
Lighting
MILWAUKEE M12™ LED STICK LIGHT ACCESSORY MAGNET
Designed for use with the M12 LED Stick Light, the stick light accessory magnet uses rare earth magnets to provide lasting magnetic force. It allows users the ability to secure the M12 LED Stick Light on metal surfaces for hands free use.
(0 reviews) -
Cutting Wheels
DYMAXION Diamond Saw Blades Mesh Rim for ceramic tiles and stone
- Mesh Rim blades have softer bonds for cutting hard materials such as tile, porcelain, marble, and other materials that can chip easily.
- These blades have a thin 1.5mm kerf to minimise surface chipping and reduce cutting friction.
- Most continuous rim and mesh rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting Wheels
DYMAXION Diamond Saw Blades Continuous Rim for glazed tiles
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable Feeding
MILWAUKEE FISH STICK LIGHTED TIP ACCESSORY
Our Lighted Tip Fish Stick Accessory provides the best visibility. Light is directed forward even when you are using it with other tool accessories. The tip features an LED light and replaceable batteries. The Lighted Tip provides you with durability for heavy job site use. It is compatible with all Milwaukee® electrical fish sticks and fish stick accessories.
(0 reviews)