[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

CRC Zinc It 350g

CRC ZINC IT is a single component zinc rich compound with a special epoxy binder and contains 95% of the highest purity zinc in the dried film, to give galvanic rust prevention.

Recommended for use on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment, off shore oil rigs, ships, railroad equipment, substation equipment, transmission towers, touch up over galvanized coatings, coastal and ship borne installations subject to severe salt water and salt spray corrosion.

Easy to apply – aerosol only. Long term protection to steel because of cathodic action. Metallic zinc coating is universally accepted as the best method of rust prevention. Flexible continuous protective film. Does not contain lead. Excellent weldability.

In Stock
SKU: 2085 Categories: ,

Related products

  • CRC

    CRC Mass Air Flow Sensor Cleaner 300g

    Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.

    Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles

    Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower

     

    (0 reviews)
    Add to Quote
  • CRC

    CRC Leak Detector 510G

    CRC Leak Detector is formulated for the quick detection of gas and air leaks. The water based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak.

    Recommended for use on refrigeration units, air conditioners, exhausts, pipes, welding seams and compressors, can be used for almost all types of gasses (compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen and carbon dioxide)

    Finds leaks fast, highlights all leaks, even under low pressure. Non-flammable. Water based formula with no oils, silicones or harmful solvents.

     

    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA Sika® Primer-3 N
    Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metal

    Sika® Primer-3 N is a solvent-based, 1-component primer.

    • Easy to apply
    • Water repellent
    • Short flash-off time

     

    Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.

    Advantages

    • Easy to apply
    • Water repellent
    • Short flash-off time
    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA SikaSeal® Roof & Gutter
    1-component neutral cure roof and gutter silicone sealant

    SikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
    SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.

    • Neutral cure
    • Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
    • Non-sag
    • Roofs
    • Gutters
    • Polycarbonate roof sheeting
    • Around plumbing fixtures and penetrations
    • General interior & exterior sealing around the home

    Advantages

    • Neutral cure
    • Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
    • Non-sag
    • Great tooling characteristics
    • Interior and exterior usage
    • Fast curing
    • Minimum movement capability ±25%
    • High temperature resistance (-40°c to +150°c)
    (0 reviews)
    Add to Quote