Additional information
| Size | 1L, 5L |
|---|
CRC WattsUp Solar Panel Cleaner
DESCRIPTION
CRC WattsUp Solar Panel Cleaner effectively removes contaminants from solar panels. maximising power generation. It is formulated to remove pollen, pollution, bird droppings, dust, dirt, salt spray and more, leaving a spot free finish.
CRC WattsUp Solar Panel Cleaner is non-corrosive and contains no solvents, making it safe for the user and the environment.
Applications
CRC WattsUp Solar Panel Cleaner is non-corrosive and contains no solvents which is an excellent choice for effectively cleaning solar panels in commercial, industrial, and solar farm settings.
For optimal results, follow the usage instructions.
Inspect entire system prior to cleaning to check for loose or broken wires and panels. Always clean panels early in the morning or at night when panels are cool.
- Step 1: Recommended dilution rate is 1 part CRC WattsUp Solar Panel Cleaner with 30 parts waters (1:30). For heavily soiled areas use a higher concentration.
- Step 2: Rinse panels with CRC WattsUp Solar Panel Cleaner, removing loose debris. Only wet number of panels that can be brushed and rinsed before solution dries.
- Step 3: Wash panels with non-abrasive cleaning equipment, i.e., sponge, lint free cloth.
- Step 4: Repeat steps 1 and 2 as needed for heavy contamination.
- Step 5: Rinse panels with CRC WattsUp Solar Panel Cleaner or with water and let it dry.
Panels can be dried with a microfibre cloth for glass if desired.
Features/Benefits:
- Restores solar cells efficiency to maximise solar panel output
- Effectively removes bird droppings, dust, dirt, salt spray, and more
- Anti-static properties keep panels clean for longer
- Easy to use – once diluted, it can be sprayed through a commercial spray applicator followed by rinsing with water
- Non-corrosive and contains no solvent – safe for aluminium frames
- Concentrate Formula – 1 part CRC WattsUp Cleaner with 30 parts water (1:30)
- 1L: Makes up to 31L – Cleans up to 125 panels or 204sqm
Result may vary depending on conditions, levels of contamination and dilution rates.
Related products
-
CleanersCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
CRCCRC Leak Detector 510G
CRC Leak Detector is formulated for the quick detection of gas and air leaks. The water based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak.
Recommended for use on refrigeration units, air conditioners, exhausts, pipes, welding seams and compressors, can be used for almost all types of gasses (compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen and carbon dioxide)
Finds leaks fast, highlights all leaks, even under low pressure. Non-flammable. Water based formula with no oils, silicones or harmful solvents.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSkeleton Gun 250mm
Skeleton Caulking Gun
250mm Aluminium
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews)