CRC Black Zinc 300g
Coloured zincs are quick drying, primer less topcoats, reinforced with zinc complexes for added corrosion control. Will outlast standard decorative paints by resisting undercutting and blistering from corrosion. The zinc content assists adhesion to bare metals.
Recommended as a top coat for added corrosion control
Dries to deep rich finish. Final finish is both scratch and solvent resistant. Optimum level of zinc complexes give outstanding protection over bare metal. Does not require undercoat. Unique resin system bonds strongly to most metals.
Related products
-
Industrial
CRC Brakleen Non Chlorinated 400g
Non Chlorinated Brakleen Brake and Parts Cleaner is specifically formulated give the user a non-chlorinated option to quickly and safely remove brake fluid, grease, oil and other contaminant from brake linings, pads, drums and callipers. Selected solvents, controlled evaporation, low surface tension and high density ensure superior cleaning and degreasing properties and can even lift and remove oil and grease that has already penetrated linings.
Recommended for the cleaning and effective removal of grease and oil from mechanical brake linings, drums, brake shoes, disc brake pads, discs, wedge brakes, springs, callipers, clutches, clutch discs, chains, wire ropes, dies, moulds, parts, and bearings
Fast evaporation. Minimizes downtime associated with ‘clean-in-place’ cleaning methods. Residue free. Prevents harmful build-up and eliminates rinsing or wiping. Non-staining, and non-corrosive. 360° Valve.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial
CRC Tac2 Adhesive Lubricant 300g
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews)