CHEMTOOLS No Clean Liquid Flux Dispensing Pen
No Clean Liquid Flux Dispensing Pen
No Clean Liquid Flux is specially formulated for electrical and electronic repair and rework. It offers superior wetting ability and faster wetting for leaded and lead-free solders. This flux is designed to be a no-clean, non-visible residue flux which can be cleaned if critical to the product application.
Features: Low residue, fast wetting, improves soldering performance, eliminates the need and expense of cleaning.
Applications: Electrical maintenance, electronic maintenance and manufacturing, telecommunication, military & avionics, railways, mining.
Related products
-
CRCCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-105
Ready to use water based thick layer surface fillerSika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
- A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
- Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
Advantages
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
CRCCRC Brakleen NF
CRC BRAKLEEN NON FLAMMABLE is a powerful, heavy duty cleaner and degreaser for brake, clutch parts and general mechanical equipment. It is formulated to quickly and safely dissolve and flush away grease, oil, transmission fluid, brake fluid, hardened deposits and other contaminants, without the need for disassembly – reducing maintenance costs. It’s also perfect for degreasing components prior to reassembly – especially prior to thread locking.
Spray parts liberally with CRC BRAKLEEN NF and allow to run off. Air dry or dry with soft cloth If necessary, repeat application Protect rubber brake parts and painted surfaces from overspray Protect rubber brake parts and painted surfaces from overspray. Ideal for use where a non-flammable parts cleaner is required.
Quick cleaning and quick evaporating. Non-staining, non-corrosive, no residue. Does not contain silicones. No disassembly required – saves time and maintenance cost. Controlled spray action – assists cleaning through surface agitation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-206 G+P
Pigmented, solvent-based primer for various substratesSika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.- Enhanced adhesion on a wide variety of substrates
- Easy to apply
Usage
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews)