CHEMTOOLS Lead-Free Solder Paste (Sn96.5/Ag3.0/Cu0.5)
Chemtools lead free solder paste syringes provides a quick and easy soldering solution for your surface mount rework. Supplied in a syringe for easy application, simply apply it to the soldering pads, put your components in place and heat it with your soldering iron or hot air rework tool.
Related products
-
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-3 N
Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metalSika® Primer-3 N is a solvent-based, 1-component primer.
- Easy to apply
- Water repellent
- Short flash-off time
Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.Advantages
- Easy to apply
- Water repellent
- Short flash-off time
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-105
Ready to use water based thick layer surface fillerSika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
- A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
- Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
Advantages
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
CleanersCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews)