Additional information
Size/Container | 5L, 20L |
---|
Corrofix™ Neutraliser for Acidic Treatments is a concentrated alkaline solution which is specially formulated to neutralise acidic pickling waste or other acid deposits on stainless steel welds and other metals. It contains an inbuilt pH indicator which provides a visual colour change after neutralisation, and is easily rinsed away with water, leaving no residue.
Size/Container | 5L, 20L |
---|
CRC Brakleen Brake and Parts Cleaner formulated to quickly and safely remove brake fluid, grease, oil and other contaminants from brake linings, pads, drums and callipers. Selected solvents, controlled evaporation, low surface tension and high density ensure superior cleaning and degreasing properties and can even lift and remove oil and grease that has already penetrated linings.
Recommended for the cleaning and effective removal of grease and oil from mechanical brake linings, drums, brake shoes, disc brake pads, discs, wedge brakes, springs, callipers, clutches, clutch discs, chains, wire ropes, dies, moulds, parts and bearings
Fast evaporation. Minimizes downtime associated with ‘clean-in-place’ cleaning methods. Residue free. Prevents harmful build-up and eliminates rinsing or wiping. Non-staining, and non-corrosive.
Clean Plus Car Wash & Wax 5L
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
CRC Leak Detector is formulated for the quick detection of gas and air leaks. The water based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak.
Recommended for use on refrigeration units, air conditioners, exhausts, pipes, welding seams and compressors, can be used for almost all types of gasses (compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen and carbon dioxide)
Finds leaks fast, highlights all leaks, even under low pressure. Non-flammable. Water based formula with no oils, silicones or harmful solvents.