Additional information
| Size/Container | 5L, 20L |
|---|
CHEMTOOLS Corrofix™ Neutraliser for Acidic Treatments
Corrofix™ Neutraliser for Acidic Treatments
Corrofix™ Neutraliser for Acidic Treatments is a concentrated alkaline solution which is specially formulated to neutralise acidic pickling waste or other acid deposits on stainless steel welds and other metals. It contains an inbuilt pH indicator which provides a visual colour change after neutralisation, and is easily rinsed away with water, leaving no residue.
Related products
-
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
CleanersCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Automotive Electronic Cleaner
DESCRIPTION
CRC Automotive Electronic Cleaner is a state of the art cleaner specially formulated for use on todays Hi-Tech Electronic and Computerised vehicles. CRC Auto Electronic Cleaner is an inert high purity cleaning solvent formulated for use on precision instruments, equipment and components. It removes dirt, tarnish, dust, grease, oil and other deposits preventing arcing between dry contacts. It is ideal for use on multi pin connectors, dash connections, printed circuit boards, relays, plugs, switches and fuse assemblies. CRC Auto Electronic Cleaner is anti-static, non-conductive and leaves no residue. It is fast drying and safe to use on plastic and rubber. Periodic use of CRC Auto Electronic Cleaner as a preventative maintenance tool can aid in prolonging the life of costly equipment.Applications
Recommended remove dirt, tarnish, dust, grease, oil and other deposits preventing arcing between dry contacts Recommended for use on multi pin connectors, dash connections, printed circuit boards, relays, plugs, switches and fuse assemblies
Features/Benefits:
Leaves no residue. Fast drying. Safe on plastic and rubber. Removes dirt, tarnish, dust, grease, oil and other deposits. Prevents arcing. Non-conductive.
(0 reviews)