[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

CHEMTOOLS ChemTig™ Prep-Solv Metal Cleaner & Degreaser

ChemTig™ Prep-Solv Metal Cleaner & Degreaser

ChemTig™ Prep-Solv Metal Cleaner & Degreaser is a blend of fast drying aliphatic solvents, formulated to effectively penetrate and dissolve a diverse range of oils, coolants, greases, and waxes. It is compatible with most metals and alloys, including steel, stainless steel, aluminium, and copper.

Prep-Solv leaves no visible residues and can be used to wipe away finger prints, machine oil, and greases prior to welding. It will also remove any remaining anti-spatter residue from metal surfaces prior to painting or powder coating.

This product contains no CFCs or chlorinated solvents.

In Stock
SKU: N/A Categories: ,

Additional information

Size/Container

240g Aerosol

Related products

  • Chemicals, Lubricants & Adhesives

    SIKA Sikaflex®-252
    Elastic adhesive for vehicle assembly bonding

    Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.

    • Bonds well to a wide variety of substrates
    • Capable of withstanding high dynamic stresses
    • Good gap-filling properties
    • Bonds well to a wide variety of substrates
    • Capable of withstanding high dynamic stresses
    • Good gap-filling properties
    • Can be painted
    • Vibration-damping
    • Electrically non-conductive

    Usage

    Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

    (0 reviews)
    Add to Quote
  • Cleaners

    CRC Mass Air Flow Sensor Cleaner 300g

    Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.

    Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles

    Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower

     

    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA Sika® Primer-3 N
    Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metal

    Sika® Primer-3 N is a solvent-based, 1-component primer.

    • Easy to apply
    • Water repellent
    • Short flash-off time

     

    Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.

    Advantages

    • Easy to apply
    • Water repellent
    • Short flash-off time
    (0 reviews)
    Add to Quote
  • Chemicals, Lubricants & Adhesives

    SIKA Sika® Filler-101
    Ready to use water based fine surface and joint filler

    Sika® Filler-101 is a water based, ready to use joint filling and wide spreading of internal surfaces

    • Ready to use, no mixing required
    • Easy application
    • High initial tack or grab on plaster and concrete
    • Sika® Filler-101 is suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
    • Sika® Filler-101 has a very smooth finish
    • Sika® Filler-101 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)

    Advantages

    • Ready to use, no mixing required
    • Easy application
    • High initial tack or grab on plaster and concrete
    • Quick drying
    (0 reviews)
    Add to Quote