CHEMTOOLS AutoChem™ Carbi, Choke & Throttle Body Cleaner
In StockRelated products
-
CleanersCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Natural Degreaser
DESCRIPTION
CRC Natural Degreaser is a unique biodegradable heavy duty cleaner/degreaser that is extremely effective for dissolving and removing grease, oils, lubricants, adhesives and contaminants without requiring water wash off and without leaving a residue. CRC Natural Degreaser is non-corrosive, non-abrasive and non-staining.Applications
Recommended for the effective removal of grease, oil, corrosion and sludge from air tools, mechanical brakes, clutches, chains, wire rope, motors, dies, moulds, parts, bearings, generators and compressors
Features/Benefits:
Readily biodegradable per OECD 301B. Leaves no residue. Prevents harmful build up on equipment and eliminates wiping and rinsing. Minimises down time associated with clean in place cleaning methods. No Class l or ll ozone depleting chemicals.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-206 G+P
Pigmented, solvent-based primer for various substratesSika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.- Enhanced adhesion on a wide variety of substrates
- Easy to apply
Usage
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews)