| Diameter | 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm, 46mm, 47mm, 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm, 59mm, 60mm |
|---|
Bordo Ultra Thin General Purpose Diamond Saw Blade (7461)
Sizes: 103mm, 125mm
Use for: Porcelain, Ceramic tiles, Vitrified tiles, Glazed tiles, Terracotta, Granite, Marble, Slate, Limestone, Sandstone, Man-Made stone, Composite stone.
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cut
HOLEMAKER PILOT PIN, 6.34MM x 102MM, TO SUIT 50MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 50mm
Overall Length: 102mm
Set Includes:
1x AS1425 14mm x 25mm
1x AS1825 18mm x 25mm
1x AS2225 22mm x 25mm
1x SP16003 Short Pilot Pin
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.
FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.