BORDO Screw Out Set
- ScrewOut Set
- 4 Piece Set
- For the rapid removal of damaged screws and bolts.
- Removes #4 to #14 Screws.
- Removes 5.0mm to 8.0mm Bolts.
- Removes #10 to 5/16″ Bolts.
SKU: 9901-S1
Categories: Extractors, Screw & Bolt Extractors
Related products
-
Screw Extractors
KINCROME Screw Extractor Set 5 Piece
Specifications
Brand KINCROME Pieces 5 Warranty Kincrome Quality Material Chrome Vanadium Steel (Cr-V) Features
Manufactured from chrome Vanadium steel with square drive endspackaged in a Convenient vinyl wallet.Contents
1x 3 – 6mm, 1/8″ – 1/4″
1x 6 – 8mm, 1/4″ – 5/16″
1x 8 – 11mm, 5/16″ – 7/16″
1x 11 – 14mm, 7/16″ – 9/16″
1x 14 – 18mm, 9/16″ – 3/4″(0 reviews) -
Extractors
BORDO Bolt Extractor Set
- Impact rated 3/8″ square drive bolt extractor socket set
- 9 piece set includes 8, 10, 11, 12, 13, 14, 16, 17 and 19mm sockets
- Rusted or rounded heads on bolts are a frustrating problem and are traditionally difficult to remove.
- The Bordo bolt extractor set makes removing these damaged fasteners easy.
- This set covers 9 common socket sizes from 8 to 19mm and their chrome molybdenum steel construction ensures a long tool life even in the toughest conditions.
- The bolt extractor sockets feature a 3/8″ square drive and are suitable for use with a 3/8″ breaker bar or ratchet.
- Makes the difficult job of removing rounded or rusted hex head fasteners simple.
(0 reviews) -
Drill Bits & Sets
BORDO LEFT HAND Cobalt HSS-Co5 Set
- HSS-Co5 (Cobalt) Left Hand Twist Drill Set
- Bordo Fractional Left Hand Cobalt Tough HSS-Co5 Twist Drills.
- 135° Split Point (crankshaft point)
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Left Hand Twist drills are ideal for use with screw extractors to remove broken bolts and screws.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews) -
Extractors
BORDO Square Screw Extractor Set
- Square Screw Extractor 5 Piece Set Nos 1-5
- Chrome Molybdenum square screw extractor.
- Square screw extractors feature four sided sharp undercut edges to provide a solid grip and will not expand damaged fastener during extraction.
- They are ideally suited for removing broken bolts, studs & socket screws from medium to hard metals.
- Typically the required screw extractor will be approx. 2/3 the diameter of the fixing you are extracting.
- Use a centre punch to mark the centre of the fixing before drilling to prevent the drill bit wandering.
- Select a drill bit that is suitable for drilling into the specific material – typically HSS or HSS-Co5. Ideally the drill should be “Left Hand” which will prevent further tightening of the fixing during drilling.
- When using left hand drills ENSURE THE DRILL IS SET TO REVERSE.
- Drill pilot hole in centre of broken bolt, screw or stud.
- Lightly tap screw extractor into hole and turn anti-clockwise with a tap wrench or spanner.
- Damaged bolt, screw or stud will unwind out of the hole.
- Avoid excessive lateral loads – breakage could result.
- Wear eye and hearing protection.
(0 reviews)