[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO MTS Machine Metric

  • Bordo Morse Taper Shank Machine Reamers are made from premium quality HSS.
  • 10° left hand spiral for effective swarf removal.
  • Right hand cutting.
  • H7 hole limit (tolerance).
  • Machine reamers have a morse taper shank that enables a constant cutting force to be applied by the machine, and cutting starts immediately.
  • Machine reamers have only a slight lead in to start.

In Stock
SKU: N/A Categories: ,

Additional information

Size

3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm, 13.5mm, 14mm, 14.5mm, 15mm, 15.5mm, 16mm, 16.5mm, 17mm, 17.5mm, 18mm, 18.5mm, 19mm, 19.5mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm

Related products

  • Chucking

    BORDO Chucking Metric
    • Bordo Chucking Reamers are made from premium HSS-Co.
    • They feature a 10° left hand spiral for effective swarf removal.
    • Right hand cutting.
    • H7 hole limit (tolerance).
    • Chucking reamers are used in a drill chuck or collet and are ideal for machining applications to create a sliding fit, to secure dowel pins, etc.
    • Chucking reamers are characterised by a very short lead at the start.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Bridge

    BORDO MTS Bridge
    • HSS Morse Taper Shank Tapered Spiral Flute Bridge Reamer
    • Bridge reamers are used to create an aligned hole in a structural steel assembly. These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams, angles, channels, and plates.
    • The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work.
    • All tools are constructed with left-hand spiral and right-hand cut.
    • The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.
    • In large structural assemblies, the holes are generally punched undersize and then reamed when in position.
    • The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.
    • Coolant or cutting tool lubricant should be utilitised when possible.
    • Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.
    • Bridge reamers should be run at half the R.P.M. suggested for a corresponding twist drill size.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Adjustable

    BORDO Adjustable Fractional Reamer
    • Bordo Adjustable Reamers are made from premium HSS.
    • Precise hole control through adjustable sizing.
    • Replaceable blades for maximum tool life.
    • With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
    • Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
    • Progressive cuts of around 0.05mm per pass are required to avoid chatter.
    • Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Adjustable

    BORDO Adjustable Nut
    • Bordo Adjustable Reamers are made from premium HSS.
    • Precise hole control through adjustable sizing.
    • Replaceable blades for maximum tool life.
    • With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
    • Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
    • Progressive cuts of around 0.05mm per pass are required to avoid chatter.
    • Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page