[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO HSS Co5 TiN Coated Single Flute 90° Countersink

  • Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
  • The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
  • This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
  • Use on light to medium materials.
  • Resharpenable.
  • M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
  • This increases tool life in all production applications.
  • Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
  • This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
  • This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
  • As with all surface coated tools, performance will deteriorate after resharpening.

In Stock
SKU: N/A Categories: ,

Additional information

Size

10mm, 15mm, 20mm, 25mm, 30mm

Related products

  • Countersink

    BORDO HSS Co5 Bright Cross Hole 60° Countersink
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Countersink

    BORDO Countersink Single Flute Indexable Carbide Inserts
    •  cutting edges for longer tool life.
    • Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
    • B100 is a unique rare metal grade with great heat and cracking resistance.
    • TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
    • PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Countersink

    BORDO HSS Co5 Bright Cross Hole 60° Countersink Set
    • 5 Pce 10-30mm 60 Degree HSS Co5 Cross Hole Countersink Set
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    (0 reviews)
    Add to Quote
  • Countersink

    BORDO HSS Co5 Bright Cross Hole 90° Countersink Set
    • 5 Pce 10-30mm 90 Degree HSS Co5 Cross Hole Countersink Set
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    (0 reviews)
    Add to Quote