[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO HSS Co5 TiN Coated Cross Hole 90° Countersink

  • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
  • The intersection of the hole and cone form the cutting edge on the tool.
  • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
  • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
  • This clearance is referred to as cutting relief.
  • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
  • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
  • Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
  • This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
  • This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
  • As with all surface coated tools, performance will deteriorate after resharpening.

In Stock
SKU: N/A Categories: ,

Additional information

Size

6.35mm, 10mm, 15mm, 20mm, 25mm, 30mm, 40mm

Related products

  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Set
    • 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
    • Tungsten Carbide 4 Cutter Glass and Tile Drill Set
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote
  • Drill Bits & Sets

    BORDO Spade Bit 150mm
    • Standard length 150mm Fast Cut Spade Bit
    • Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
    • The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
    • Low cost per hole.
    • Fast starting.
    • Hex shank prevents slippage in drill chuck.
    • Hex shank ensures a positive lock in spade bit extensions.
    • Suits all standard quick change adaptors.
    • Recommended speed 1500-2000 RPM.
    • Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
    • Do not use side to side movements when drilling.
    • DO NOT USE HAMMER ACTION
    • DO NOT USE FOR DRILLING METAL
    • DO NOT EXCEED 2500 RPM
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO Solid Core Extensions
    • 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
    • The Bordo range of magnetic bit holders feature powerful magnets.
    • Suitable for use with all 1/4″ 25mm insert bits.
    (0 reviews)
    Add to Quote
  • Drill Bits & Sets

    SUTTON Jobber Drill Sets – TiNite

    Sutton Tools TiNite® jobber drills are for high performance drilling. Lasts up to 6 times longer than standard HSS drill bits. For drilling metal & tougher alloy steels such as steel, stainless steel, copper, brass, aluminium & cast iron.

    (0 reviews)
    Add to Quote