BORDO Double Brick Straight Shank TCT Masonry Drill

Related products

• 

  Drill Bits/Sets

  BORDO Solid Core Extensions

  • 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
  • The Bordo range of magnetic bit holders feature powerful magnets.
  • Suitable for use with all 1/4″ 25mm insert bits.

  (0 reviews)

  Add to Quote
• 

  Drill Bits/Sets

  BORDO 4 Cutter Glass and Tile Drill Set

  • 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
  • Tungsten Carbide 4 Cutter Glass and Tile Drill Set
  • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
  • Fast starting with reduced bit wander.
  • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
  • Not suitable for use with toughened or laminated safety glass.
  • Use a slow speed with steady but gentle pressure.
  • Reduce the pressure at break through.
  • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
  • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
  • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
  • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
  • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
  • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
  • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
  • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.

  (0 reviews)

  Add to Quote
• 

  Drill Bits/Sets

  BORDO Scotch Pattern Auger Bit 305mm

  • Scotch Pattern Auger Bit High Carbon Steel.
  • Heavy duty two flute auger bits are extremely efficient cutting – perfect for Australian soft and hard woods.
  • Wide flutes provide rapid chip evacuation with a heavy duty worm point that resists breakage.
  • Unlikely to deviate due to grain or imperfections in the timber (such as knots).
  • Heavy duty milled flute design.
  • Hardened cutting edge for long life in hard timber.
  • Fully-forged bit for maximum durability.
  • Resharpenable.

  (0 reviews)

  Add to Quote This product has multiple variants. The options may be chosen on the product page
• 

  Drill Bits/Sets

  BORDO Spade Bit 150mm

  • Standard length 150mm Fast Cut Spade Bit
  • Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
  • The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
  • Low cost per hole.
  • Fast starting.
  • Hex shank prevents slippage in drill chuck.
  • Hex shank ensures a positive lock in spade bit extensions.
  • Suits all standard quick change adaptors.
  • Recommended speed 1500-2000 RPM.
  • Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
  • Do not use side to side movements when drilling.
  • DO NOT USE HAMMER ACTION
  • DO NOT USE FOR DRILLING METAL
  • DO NOT EXCEED 2500 RPM

  (0 reviews)

  Add to Quote This product has multiple variants. The options may be chosen on the product page