Additional information
| Size | 105mm, 115mm, 125mm, 150mm, 180mm, 230mm, 350mm, 400mm |
|---|
BORDO Diamond Saw Blades Tradecut Diamond Segmented Rim
- Tradecut Diamond Segmented Rim
- High diamond count for long blade life.
- Segmented rim for clean, fast cuts both wet and dry.
- Free cutting with reduced vibration.
- Efficient slurry evacuation.
- Use to cut cured concrete, reinforced concrete, clay bricks, Hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick and concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
Related products
-
Saw BladesBORDO Bi-Metal Xtreme Fire, Rescue & Extrication
- Bi-Metal with Cobalt Fire, Rescue and Extrication Blades are extra thick for heavy duty cutting and long life.
- 14 TPI Fire, Rescue and Extrication Blades.
- For cutting pipe, angle iron, nail embedded wood and structural steel.
- Wider (25mm – 1″) and thicker (1.1mm – .042″) blades for demolition work.
- Available in 152mm (6″), 229mm (9″) and 305mm (12″) lengths with 1/2″ universal shanks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Saw BladesBORDO TCT Circular Saw Blades Tradecut Concrete Formwork
- 235mm x 20T Tradecut Concrete Formwork Blade
- High performance, tungsten carbide tipped timber blades from 160mm to 305mm.
- Heavy duty anti-kickback tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
- Fully hardened and tempered steel body resists warping even in the most demanding applications.
- High performance diamond ground carbide teeth for improved cutting efficiency.
- Designed for optimum performance and long blade life when cutting engineered woods such as hardwood ply and form ply.
(0 reviews) -
Saw BladesBORDO Reciprocating Saw Blade Set
- Reciprocating Saw Blade Assortment with heavy duty ballistic nylon pouch
- Xtreme reciprocating Saw Blade Assortment includes 2 x “Fire Rescue & Extrication”, 2 x “Wrecking and Demolition” and 3 metal cutting blades.
- 14 TPI Fire, Rescue & Extrication Saw Blades.
- For cutting pipe, angle iron, nail embedded wood and structural steel.
- 6 TPI Wrecking & Demolition Saw Blades.
- For cutting wood, sleepers and other tough materials.
- 18 and 24 TPI Bi-Metal Blades.
- For cutting thin and medium sheetmetal and tube.
(0 reviews) -
Saw BladesBORDO Arborist Green Wood Blades
- High carbon steel blades suitable for use in all green timber.
- Aggressive cutting in softwoods.
- Ideal for pruning, cutting tree branches and roots.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page