BORDO Diamond Mist Drill Cutters

The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
They produce no-crack, burr-free holes with minimum spalling.
The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
Rotary only action ensures low noise and vibration.
Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.

(0 reviews)

BORDO Universal Drills

DIN 8039/ISO 5468
Special cutting edge geometry.
Diamond-ground titanium carbide tip.
Universal drill bit with asymmetric spiral shape.
Cutting drilling spiral for optimum spoil removal.
Straight flute entry.
High-temperature brazing at 1120°C.
Specially ground cutting helix with micro surface hardness.
For use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood / PVC / Acrylic Glass Tiles, Hard burnt brick.
Not for hammer action.

(0 reviews)

Brilliant Diamond Vacuum Brazed Core Drill Set.
Vacuum brazed, self lubricating, wax filled diamond core drills.
One piece hex shank.
Suitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.
The wax filled core lubricates the cutting edge allowing dry, water free, drilling.
Apply spinning core drill to workpiece at an angle so that only the edge is engaged.
As a small groove begins to form gradually move the drill until the saw is flat and fully engaged with the workpiece.
Alternatively position the saw using a Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece.
Drilling using Bordo Brilliant Diamond Core Drills can be done dry however the use of water cooling may extend tool life.
Water and electricity are a dangerous combination always maintain a safe working environment.

(0 reviews)

Diamond Mist Drill Body No. 1
The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
They produce no-crack, burr-free holes with minimum spalling.
The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
Rotary only action ensures low noise and vibration.
Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.

(0 reviews)