Additional information
Pilot Drill | 1/4 x 3.1/2" Pilot Drill, 1/4 x 4.1/2" Pilot Drill, 1/4 x 3.1/2" TCT Pilot Drill, 1/4 x 4.1/2" TCT Pilot Drill |
---|
Pilot Drill | 1/4 x 3.1/2" Pilot Drill, 1/4 x 4.1/2" Pilot Drill, 1/4 x 3.1/2" TCT Pilot Drill, 1/4 x 4.1/2" TCT Pilot Drill |
---|
PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.
TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.
HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.
ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.
SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.
Not for impact use.
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.
TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.
ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.
SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.
VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.
16 Piece Set Includes:
1 x UN100-016 – 16mm (5/8″)
1 x UN100-019 – 19mm (3/4″)
1 x UN100-022 – 22mm (7/8″)
1 x UN100-025 – 25mm (1″)
1 x UN100-030 – 30mm (1-3/16″)
1 x UN100-035 – 35mm (1-3/8″)
1 x UN100-044 – 44mm (1-3/4″)
1 x UN100-051 – 51mm (2″)
1 x UN100-057 – 57mm (2-1/4″)
1 x UN100-073 – 73mm (2-7/8″)
1 x UN100-092 – 92mm (3-5/8″)
1 x UN100-114 – 114mm (4-1/2″)
1 x UN102-125 – 11/32″ Arbor
1 x UN102-140 – 7/16″ Arbor
1 x UN102-145 – Arbor Thread Adaptor
1 x UN102-100 – 12″ Extension Bar