Bordo Metric Blue Band HSS-Co TiAlN Coated Stub Drills for Stainless Steel.
DIN1897
Multi-faceted point with two helical flutes with 35 degrees of helix angle.
The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
They are designed primarily for machining operations in lathes (screw machines) but can also be used in manual hand held drills.
The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
TiAlN coating increases tool surface hardness to 87Rc.
For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
(0 reviews)
Add to Quote
This product has multiple variants. The options may be chosen on the product page
Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
ANSI B94-11
135° Split Point (crankshaft point).
Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
The 135° point should be used to cut harder steel materials especially in deep hole applications.
In these situations it will produce thicker chips minimising work hardening of the cavity.
Faster penetration reduces abrasion and friction along the cutting edges.
Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)
Add to Quote
This product has multiple variants. The options may be chosen on the product page
Bordo Fractional Left Hand Cobalt Tough HSS-Co5 Twist Drills.
135° Split Point (crankshaft point)
Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
The 135° point should be used to cut harder steel materials especially in deep hole applications.
In these situations it will produce thicker chips minimising work hardening of the cavity.
Faster penetration reduces abrasion and friction along the cutting edges.
Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
Left Hand Twist drills are ideal for use with screw extractors to remove broken bolts and screws.
Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
ANSI B94-11
135° Split Point (crankshaft point).
Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
The 135° point should be used to cut harder steel materials especially in deep hole applications.
In these situations it will produce thicker chips minimising work hardening of the cavity.
Faster penetration reduces abrasion and friction along the cutting edges.
Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)
Add to Quote
This product has multiple variants. The options may be chosen on the product page