BORDO Arborist Green Wood Blades

Related products

• 

  Saw Blades

  BORDO Jig Saw Blade T-Shank Tungsten Carbide GritEdge

  • 75mm Straight Cut Carbide GritEdge Jigsaw Blade 2Pk
  • Jig Saw TCG T-Shank Straight Cut 75mm Ceramic/Fibre – 2 Pack
  • Abrasive 1.0 to 15.0mm.
  • Precise, straight cuts in ceramics, glass, fibre cement sheet and fibreglass reinforced synthetics.

  (0 reviews)

  Add to Quote
• 

  Saw Blades

  BORDO Diamond Saw Blades Hard Brick & Masonry

  • 350mm Segmented Diamond Hard Brick Blade
  • Hard brick and masonry.
  • 10mm segmented rim for fast cutting with enhanced blade/substrate interface cooling for long blade life.
  • Optimally designed for cutting cured concrete and stone.
  • Extreme concentration of diamond for fast, clean cutting and long blade life.
  • Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
  • Use when cutting bluestone, hard clay brick, fire brick, cured concrete, concrete block, concrete brick, granite, marble, wall chasing in hard brick & concrete.
  • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
  • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
  • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
  • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
  • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
  • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
  • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
  • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.

  (0 reviews)

  Add to Quote
• 

  Saw Blades

  BORDO TCT Circular Saw Blades Alucut

  • Alucut Blade for Aluminium Cutting – Non-Ferrous Metals, including Copper & Brass, Plastic, and Timber
  • Fast clean cuts in aluminium and non-ferrous metals including copper, brass, plastic and timber.
  • Triple chip tungsten carbide teeth for high performance smooth cutting.
  • Heavy duty thick steel plate hardened and tempered to ensure accurate cuts.
  • Smooth and fast cutting with solid stock in stationary and semi-stationary saws.
  • Negative rake angle eliminates self-feeding and reduces blade grab.

  (0 reviews)

  Add to Quote This product has multiple variants. The options may be chosen on the product page
• 

  Saw Blades

  BORDO TCT Circular Saw Blades Multicut

  • Multicut Blade for Timber, Steel, Aluminium – Ferrous & Non-Ferrous Metals, Plastic, Timber, Plaster & Fibreglass
  • Fast clean cuts in timber, ferrous and non-ferrous metals, plastic, plaster and fibreglass.
  • Titanium carbide metal cutting teeth provide long blade life in the most demanding applications.
  • Heavy duty anti-kick back tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
  • Cool cutting with no heat, no burrs or dust and minimal sparks when cutting metal.

  (0 reviews)

  Add to Quote This product has multiple variants. The options may be chosen on the product page